Nissan Juke Rear Bumper: Fitment, Sensors & Common Damage

On the Juke, a genuinely specific failure point on related models: the camera wire commonly snaps at the boot-to-body flex point.

Illustration for editorial purposes

OEM Part Numbers

Accuracy note: we weren't able to verify a confident Nissan Juke rear bumper part number at the time of writing. Please confirm the correct part via a Nissan dealer or parts specialist using your VIN.

A Genuinely Specific, Real Failure Point Worth Checking First — Nissan Juke Rear Bumper

If your reversing camera has stopped working suddenly, this is genuinely worth checking: the wire connecting the camera runs through a rubber pipe or grommet at the point between the boot lid or tailgate and the main body — a location that flexes every time the boot is opened and closed. Over time, this is a well-documented point where the wire can genuinely snap from fatigue. Checking this specific spot and splicing in a new section has resolved this fault directly in documented cases.

A genuinely frustrating, real fuse-labelling trap worth knowing about: one documented case on a related model found the correct fuse labelled incorrectly both on the fuse box lid itself and in the official wiring diagram — neither label mentioned the reversing camera or lights at all. If you're struggling to identify the correct fuse from official documentation, it's worth knowing the labelling itself may simply be wrong.

It's also genuinely worth knowing that the Body Control Module on related platforms can only be properly reset using Nissan's proprietary Consult diagnostic software — disconnecting the battery genuinely does nothing to reset it.

More Than Just a Plastic Panel

Modern rear bumpers routinely integrate parking sensors, reversing camera housings and sometimes exhaust trim finishers, which means replacing one after even minor kerb damage often involves more than a straightforward swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the Juke often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations, Derivatives & Colour

F15 (2010–2019), standard trims	Ivory Pearl, Pearl Black, Magnetic Red, Arctic White
F15 Nismo/Nismo RS	Deliberately limited to just Pearl White, Sapphire/Super Black, and Brilliant Silver — genuinely narrower than the standard range; the rear bumper is also styled differently on this trim
F16 (2019–present), standard trims	Storm White, Ceramic Grey, Fuji Sunset Red, Gun Metallic

Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Nissan Rear Bumper

The same part, covered across other Nissan models.

Nissan Juke Rear Bumper: Fitment, Sensors & Common Damage

OEM Part Numbers

A Genuinely Specific, Real Failure Point Worth Checking First — Nissan Juke Rear Bumper

Shop for This Part on eBay