Car Parts Guide
FRONT SUSPENSION STRUT Audi A5 Coupe (2016–2024, F5) · PARTS GUIDE

Audi A5 Coupe Front Suspension Strut: Specs, Fitment & Common Faults

On the A5, a top mount bearing fault on related models can be demonstrated with the bonnet open and the wheel turned lock to lock.

Generation covered: this guide is for the second-generation A5 Coupe (F5 platform, 2016–2024) — the two-door coupe discontinued when Audi renamed the A4 saloon to A5 in 2024. These are entirely different cars despite sharing a name; if your car is a four-door saloon or estate bought new since 2024, this guide does not apply to it. Check your logbook or VIN if you're unsure which car you have.
Audi A5 Coupe (F5 2016-2024) front suspension, strut Bilstein 24-275019 Illustration for editorial purposes
Find Audi A5 Coupe Front Suspension Strut Here!

Opens live listings in a new tab.

The system that quietly does all the work

Before you feel a single bump or pothole in the Audi A5 Coupe's cabin, it's already passed through these parts — which is exactly why wear tends to present as several vague, overlapping symptoms rather than one clear-cut fault. A methodical check outperforms guesswork here.

Before you buy: suspension components vary by trim, engine weight and whether your car has the standard or sport-tuned setup. Always confirm against your VIN before ordering.

OEM Part Number: confirm via VIN

Aftermarket front struts: Bilstein 24-275019 / KYB 3418009

Accuracy note: Covers the Audi A5 Coupe (F5 2016-2024) as listed in the UK aftermarket catalogues. Front struts, lower arms and top mounts are sold by side and by suspension spec — standard, sport / lowered (S line, M Sport, R-Line, ST-Line etc.), heavy-duty and adaptive / electronic damping all use different part numbers, and some makers split by engine or front axle load. The references below are UK aftermarket catalogue listings for this generation, labelled by brand; genuine numbers are shown only where a listing quotes one. Confirm the fit against your VIN, and replace struts and top mounts in pairs.
Front strut / shock absorber (aftermarket)Bilstein 24-275019 (B4 OE replacement, monotube gas, 49 mm clamp); Bilstein 24-303828 (monotube gas, 49 mm); Bilstein 24-274876 (B8 Performance Plus, monotube gas); Bilstein 24-303866 (monotube gas); KYB 3418009 (Excel-G, twin-tube gas, 14 mm rod); Meyle 126 624 0007 (twin-tube gas, with spring seat, pair)
Front lower arm / wishbone (aftermarket)LH Lemförder 39310 01 / RH Lemförder 39311 01 (aluminium; LH Meyle 116 050 0243/HD / RH 0244/HD (reinforced, ball joint, rubber mount, replace in pairs); LH febi 176371 / RH febi 176369 (aluminium, 22 mm cone, M14x1.5); LH Ridex 273C1854 / RH Ridex 273C2415 (aluminium, 413 mm); Moog AU-TC-15359 / 15360 (ball joint, side not stated)
Top mount / strut bearing (aftermarket)Lemförder 43364 01 (L/R, no rolling bearing needed); Meyle 100 412 2045 (rubber-metal, no bearing, pairs); febi 172589 (elastomer, no bearing, 12.2 mm, M8x1.25); KYB SM1114; Monroe MK493 (without rolling bearing); Swag 33 10 1381 (elastomer, no bearing)
Genuine (OE) numbers quotedLemförder 43364 01 top mount quotes 8W0 412 377 and 8W0 412 377 B; no others quoted for front parts
Fitment notesStandard strut listings only

S Line and S5/RS5 models use different, stiffer suspension components than standard Sport trim, and quattro all-wheel-drive versions have additional front driveline components not present on front-wheel-drive equivalents. Confirm your exact trim and drivetrain before ordering.

How the strut assembly holds up the A5 Coupe

The Audi A5 Coupe's front suspension combines the shock absorber and spring mount into a single strut assembly, which is what governs how the car settles after a bump. A worn one lets that bounce continue longer than it should, and it can wear tyres unevenly if ignored.

Watch: replacing it

🎬 Watch: HOW TO REPLACE FRONT SHOCK ABSORBERS ON ANY AUDI A5!

Watch on YouTube ↗

Generation not stated in title (likely 8T); B8 A4/A5 strut video also https://www.youtube.com/watch?v=Syq-u0uc0Fo

Audi A5 Coupe Front Suspension reference plate
Find Audi A5 Coupe Front Suspension Strut Here!

Opens live listings in a new tab.

Checking the top mounts first on a knocking A5 Coupe

If you're hearing a knock from the front suspension, documented cases on related Audi models describe this traced to the top suspension mount bearing, worth testing by having an assistant turn the steering wheel lock to lock with the bonnet open and the car stationary.

A knock diagnosed as the steering rack has, in documented cases, turned out to be the suspension's multi-link components instead, which can produce a misleading knock frequently mistaken for worn strut top mounts.

Bear in mind that this kind of knock can be temperature-sensitive, and that it's well known for mysteriously failing to reproduce during a dealer's own test drive.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Suspension Strut Guide for symptoms of worn bushings and ball joints, confirming fitment against your VIN, and rubber vs polyurethane guidance.

The same part on other models

The same part, covered across other Audi models.