Car Parts Guide
MASTER CLUTCH CYLINDER BMW 3 Series · PARTS GUIDE

BMW 3 Series Master Clutch Cylinder: Specs, Fitment & Common Faults

Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.

BMW 3 Series (G20 2019 ON) clutch master cylinder in the clutch hydraulic circuit, genuine number to confirm via VIN Illustration for editorial purposes
Find BMW 3 Series Master Clutch Cylinder Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident BMW 3 Series master clutch cylinder part number at the time of writing. Please confirm the correct part via a BMW dealer or parts specialist using your VIN.

Before paying for a new clutch on the 3 Series, check this

On the BMW 3 Series, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.

BMW 3 Series Master Clutch Cylinder reference plate
One reservoir, two systems

On manual 3 Series the clutch draws its fluid from the brake reservoir, so the two systems share the same fluid. That has two effects. A leak at the clutch end can lower the brake fluid level, and old, water-laden brake fluid ends up in the clutch seals too. Schaeffler, which makes LuK clutch hydraulics, warns that contaminated or incorrect fluid makes rubber seals swell and leak, so a brake fluid change at the recommended interval protects the clutch as well.

How to tell it from the slave

The 3 Series uses a slave cylinder bolted to the outside of the gearbox, which makes checking easy. If the slave is dry and the pedal still sinks slowly when held down at a standstill, the master is leaking internally. Look for damp carpet or fluid on the pedal box too, since a failing master often weeps into the footwell.

Typical cost

ClickMechanic puts the average BMW master cylinder job at about £351, the highest of the brands it lists, against a UK average of around £200. Labour runs from one to three hours depending on access behind the pedal box.

Before you buy: part numbers and fitment listed below are a general guide only. Always confirm compatibility using your vehicle's VIN, or check with a BMW parts specialist, since specifications can vary by trim, model year and market.
What it does

On the BMW 3 Series, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.

Part numbers
OEM referenceVaries by engine/transmission — confirm via VIN
Common aftermarket brandsSachs, LUK, Febi Bilstein, ATP

Checking compatibility before ordering for the 3 Series

This part is not necessarily interchangeable across every 3 Series generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your BMW 3 Series from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find BMW 3 Series Master Clutch Cylinder Here!

Opens live listings in a new tab.

Symptoms, home fitting and quality aftermarket options

These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.