Citroen C4 Engine Mount: Specs, Fitment & Common Faults
On the C4, two free tests confirm a worn mount: watch the engine surge when switching off the ignition, plus a specific gear-change clunk pattern.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket mountings: Febi 180535 / Corteco 49219172
| Engine Mount — Right upper (aftermarket) | Febi 180535, Swag 33107740 |
|---|---|
| Engine Mount — Rear (aftermarket) | Febi 181341, Swag 33108198 |
| Engine Mount — Right (aftermarket) | Original Imperium 610761, Corteco 49219172 (auto) |
| Genuine (OE) number | Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN |
| Fitment notes | The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount. |
As with most cars, several separate mounts (main engine mount, transmission mount, and torque strut) are fitted, each with its own part number that varies by engine and transmission type. The fully electric ë-C4 uses different mount points entirely given its motor and battery layout.
A visual test for C4 mountings
A simple, visual test worth trying before assuming anything else: switch off the ignition and watch the engine bay closely — on a car with a worn lower or rear engine mount, you can often physically see the engine surge or lurch forward as it comes to rest, rather than settling smoothly. This visual confirmation, combined with a distinctive clunk when pulling away in first gear and changing into second, is a reliable pattern pointing toward this specific mount rather than other suspension or drivetrain components.
Good news on cost: this specific mount has been quoted at around £30 for the part alone, and is a straightforward job — with the car correctly jacked and supported on axle stands, replacement typically takes around ten minutes once you can access the two mounting bolts underneath the car.
Watch: replacing itThis video is of an earlier generation of the same model; the job is similar but the mount positions and fixings can differ slightly.
How the C4 isolates engine vibration
Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the C4 use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.
Opens live listings in a new tab.
Vibration at idle on the C4, the job and aftermarket choice
These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.
The same part on other modelsThe same part, covered across other Citroen models.