Fiat 500 (Petrol) Fog Lights: Specs, Fitment & Common Faults
On the classic petrol 500, a rear fog light on a related model was configured as the wrong side in software until switched — oddly affecting window direction too.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: TYC 19-0688-05-2 / TYC 19-0687-05-2
| Fog light, passenger side (LH / nearside) — aftermarket | Van Wezel 1614995 (H3, PK22s, pairs with 1614996); TYC 19-0688-05-2 (H3, ECE approved); TYC 19-0688-15-2 (H3); Diederichs 3405089 (H3, made by Depo/TYC); Johns 30 03 29 (H3, pairs with 30 03 30); Van Wezel 1604997 (H3, not for facelift, pairs with 1604998) |
|---|---|
| Fog light, driver's side (RH / offside) — aftermarket | Van Wezel 1614996 (H3, PK22s); TYC 19-0687-05-2 (H3, ECE approved); TYC 19-0687-15-2 (H3); Diederichs 3405088 (H3, made by Depo/TYC); Johns 30 03 30 (H3); Van Wezel 1604998 (H3, not for facelift) |
| Bulb types | H3 (PK22s); H11 (PGJ19-2) on chrome-housing lamps; H1 |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine units against your VIN |
| Fitment notes | H3 is the standard fitment on pre-facelift cars; later cars use H11 lamps (Van Wezel 1619999 / 1619999V, Valeo 044185 with bulb for cars with dynamic bending light, fits either side); no dedicated cornering versions are listed. |
A rear fog lamp that tests fine but won't work on the 500 (Petrol)
If a rear fog light won't work despite the bulb, wiring, and fuse all testing fine, one case on a related model found the rear fog light had been configured in the car's diagnostic software as "right hand," despite being physically fitted on the right side — switching this setting to "left hand" made the light work correctly. Oddly, this same setting was also found to affect which direction the power windows operated in reverse.
One case saw testing at the bulb holder reveal virtually no voltage, eventually traced to a fault with the Body Control Module itself rather than anything simpler.
Watch: replacing themAlso https://www.youtube.com/watch?v=T-jr6Zvzds4 (fog bulb, Abarth)
MOT checks for the fog lamps
The Fiat 500 (Petrol)'s fog lights sit idle for the vast majority of owners most of the year, which is exactly why a fault can go undetected for months — surfacing only on the one properly foggy morning when it matters most.
What the fog lamps on the 500 (Petrol) are for
Front fog lights are angled and positioned to illuminate the road surface in low visibility conditions without creating the glare a standard headlight beam would in fog. Some higher trims of the 500 (Petrol) integrate fog lights into the same housing as cornering lights or daytime running lights, which affects both the part number and the complexity of any repair.
Fitment and compatibility Generations and Lamp Type| Standard trims | Halogen fog light bulb as standard |
|---|---|
| Higher trims, later model years | LED fog lights become available further up the range, a different assembly and connector from the halogen units on lower trims |
Not every trim level of the 500 (Petrol) comes with fog lights fitted as standard, and the housing design often differs between trims that have them integrated with other lighting functions and those with a standalone unit. Always confirm your specific trim's fitment before ordering. Whether you're sourcing a replacement fog lights for your Fiat 500 (Petrol) from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Fog Lights Guide for common faults to check for (including exactly what fails an MOT), how easy this job is to DIY, and aftermarket advice.
The same part on other modelsThe same part, covered across other Fiat models.