Honda HR-V Brake Discs: Specs, Fitment & Wear Symptoms
On the HR-V, "warping" is more commonly uneven pad material transfer, not thermal distortion.
Opens live listings in a new tab.
OEM Part Number: 45251-T8M-G01
As quoted in catalogue listings, confirm via VIN. Aftermarket front discs: Brembo 09.C313.11 / Bosch 0 986 479 B02
| Front brake discs (aftermarket) | Brembo 09.C313.11 (293 x 25 mm, vented, 5 holes, coated, high-carbon, min 23 mm); Bosch 0 986 479 B02 (293 x 25 mm, vented, 5 holes, oiled, min 23 mm); ATE 24.0125-0221.1 (293 x 25 mm, vented, 5 holes, coated, min 23 mm); Zimmermann 280.3192.20 (293 x 25 mm, vented, 5 holes, coated, min 23 mm); Zimmermann 280.3192.52 (293 x 25 mm, vented, 5 holes, coated, drilled, min 23 mm); febi 108477 (293 x 25 mm, vented, 5 holes, coated, min 23 mm); Blue Print ADH243133 (293 x 25 mm, vented, 5 holes, coated, min 23 mm). |
|---|---|
| Disc sizes & variants | Rear discs are 282 x 9 mm solid. |
| Genuine (OE) numbers quoted | 45251-T8M-G01 (Blue Print ADH243133); 45251-TV2-E00 (Blue Print ADH243122) |
| Fitment notes | Front minimum thickness is 23 mm; the 293 mm disc is shared with the 1.8 Civic IX. |
Deposits on the surface: the usual source of HR-V judder
If you're feeling pulsation through the brake pedal and have been told the discs have "warped," an explanation from experienced technicians is useful to know: this is much more commonly a case of Runout/Thickness Variation (RTV) — pad material transferring unevenly onto the disc surface, creating high and low spots — rather than genuine, severe thermal distortion of the disc itself.
A practical piece of advice worth following after fitting new discs or pads: use the brakes lightly for the first 200 miles specifically. The most common documented cause of discs appearing to "warp" shortly after replacement is heavy braking while the components are still new.
Watch: replacing them1A Auto style full front brake job
The surface every stop on the HR-V depends on
On the Honda HR-V, discs and pads don't wear independently — neglect one and the other degrades faster too, which is exactly why what starts as a routine pad change frequently turns into a disc replacement as well.
Vented, solid and drilled: what the HR-V uses and why
Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the HR-V typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.
The same part on other modelsThe same part, covered across other Honda models.