Hyundai ix35 Rear Bumper: Fitment, Sensors & Common Damage
On the ix35, a case on a related model saw a towbar's reverse light circuit pass the dealer's own diagnostic test perfectly, yet still not work with the actual caravan.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Blic 866112Y000
| Rear bumper covers (aftermarket) | Blic 866112Y000 (Rear) |
|---|---|
| Lower sections, corners & trims | Prasco HN8041071 (Rear, Section: Lower Section, without holes for parking sensors); Prasco HN8041051 (Rear, Section: Upper section); Prasco HN8041061OE (Rear, Section: Lower Section, with holes for parking sensors) |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A towbar circuit that tests fine but doesn't work on the ix35
If a dealer-fitted towbar's reverse light circuit isn't working with a caravan or trailer despite everything checking out, one case on a related model saw a dealer's own diagnostic equipment show the circuit working perfectly, yet the caravan's reverse lights still wouldn't illuminate when actually connected. Worth checking the physical pin voltages yourself: the pink pin on the 13-pin socket should show 12V when in reverse, with the white pin being the ground side.
Also, some Hyundai dealers have stopped offering towbar supply and fitting entirely, since Hyundai's own internal pricing can make the job commercially unviable for them — with real quotes from dealers still offering it running to £900 or more.
The parts hiding behind the ix35's rear cover
The Hyundai ix35's rear bumper routinely integrates parking sensors, a reversing camera housing and sometimes exhaust trim finishers, which means replacing it after even minor kerb damage often involves more than a straightforward swap.
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
The job the back panel does
Beyond absorbing minor impacts, the rear bumper on higher trims of the ix35 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations and Colour| All generations | Polar White, Phantom Black, Sleek Silver, Titan Grey |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Hyundai models.