Hyundai Kona Front Suspension Strut: Specs, Fitment & Common Faults
On the Kona, "Hyundai vehicles are known to eat stabilizer links for breakfast" — cheap and often warranty-covered.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket front struts: Bilstein 22-320988
| Front strut / shock absorber (aftermarket) | Bilstein 22-320988 (LH, pair 22-323439) and 22-354730 (LH, pair 22-354723) (twin-tube gas); GH GH-353444C01 (pre-assembled damper module, sold in pairs); Magnum AG0569MT (telescopic, front or rear) |
|---|---|
| Front lower arm / wishbone (aftermarket) | LH CTR CQ0397L (with ball joint and bush), KYB KSC5164, KYB KSC5068; RH KYB KSC5163 (aluminium, 457 mm); side not stated: NK 5019913/5019914, Moog HY-TC-17013/17014, A.B.S. 212154/212155 |
| Top mount / strut bearing (aftermarket) | Febi 177066 (elastomer with ball bearing, L/R); Febi 107964 (plastic, L/R); Swag 33 10 6222 and Blue Print ADBP800205 (no bearing); Sachs 801 074; Mapco 36532 |
| Genuine (OE) numbers quoted | Kamoka 209190 (top mount repair kit, RH): 546122C000; Febi 177066: 54610-F2000 S1. None for struts or arms. |
| Fitment notes | Few front struts are listed, and none from Sachs, KYB or Monroe. |
A low-speed knock over bumps, summed up by an owner
If you're hearing a knock over bumps at low speed, one long-standing forum member summed up a well-documented pattern by saying "Hyundai vehicles are known to eat stabilizer links for breakfast, thanks to plastic bushings." These are typically cheap components to replace, and if your car is still within its warranty period, this specific fault is commonly covered.
Note too that some front suspension knocks can be difficult to diagnose without significant disassembly — one case saw both a dealer and an independent mechanic unable to identify the source without taking apart a significant portion of the wheel well area.
Everything the suspension handles on the Kona, mostly unnoticed
Everything the road throws at the Hyundai Kona — bumps, potholes, cornering loads — passes through these components before it reaches the cabin, so wear here tends to show up as vague symptoms rather than one clear failure point. A systematic check beats guesswork every time.
Watch: replacing itLower arm and ball joint.
Spring, damper and top mount: the Kona's front corner explained
On the Hyundai Kona, the front suspension strut combines a shock absorber and the coil spring's mounting point into a single assembly, controlling how the suspension compresses and rebounds. Once it wears, the car keeps bouncing after a bump instead of settling quickly, and tyre wear often becomes uneven if it's left unresolved.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Front Suspension Strut Guide for symptoms of worn bushings and ball joints, confirming fitment against your VIN, and rubber vs polyurethane guidance.
The same part on other modelsThe same part, covered across other Hyundai models.