Jaguar E-Pace Radiator: Specs, Fitment & Common Faults
On the E-Pace, a plastic reservoir pipe on related models is genuinely designed to be pushed in once and is effectively permanent.
Illustration for editorial purposes
OEM Part Numbers
The Part That Keeps Everything Else From Cooking
Nothing about this component is glamorous, but almost every serious engine failure that isn't wear-related traces back to a cooling system problem left unaddressed. Catching the early signs here is genuinely cheap insurance against a much bigger bill.
What It Does
The radiator transfers heat from the engine coolant to the surrounding air, keeping engine temperature within a safe operating range. On automatic versions, it often also cools transmission fluid through a separate internal circuit — one more reason the correct part number matters so much here.
Fitment & Compatibility
Radiators differ between manual and automatic versions of the E-Pace due to the transmission cooling circuit, and again across different generations. A radiator designed for a manual gearbox car will not correctly cool an automatic's transmission fluid even if it physically fits the mounting points. Always confirm the exact part number for your specific engine and transmission combination. Whether you're sourcing a replacement radiator for your Jaguar E-Pace from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.
Common Faults
Symptoms of Failure
- Engine temperature gauge creeping up — often the earliest sign, especially noticeable in slow traffic or on long motorway runs.
- Sweet-smelling smoke from the engine bay — a strong indicator of a coolant leak, usually from a cracked radiator tank or failed seal.
- Visible coolant puddles under the front of the car — points to a leak that needs tracing back to its source before it causes overheating.
- Milky discolouration in the coolant reservoir — can indicate a more serious internal issue where coolant and oil are mixing, requiring urgent inspection.
DIY Replacement Difficulty
This is a moderate-to-difficult DIY job, typically involving draining the cooling system, removing the front bumper or grille on some model years for access, and correctly bleeding air from the system afterward. Getting the bleed process wrong can cause airlocks that mimic a still-faulty radiator, so this is one job where following the exact procedure matters. Expect 2–3 hours for an experienced home mechanic, or roughly 1–1.5 hours of labour at a garage.
A Genuinely Useful Piece of Context Worth Knowing About Coolant Pipe Fragility
If you're working on the cooling system, this is genuinely worth knowing: on related models, the plastic pipe connecting the water pump to the coolant reservoir has been documented as designed to be pushed into place once and effectively permanent, worth being careful if disturbing it.
It's also worth knowing that a coolant leak from the thermostat housing has been documented shorting out a nearby solenoid on related models, and that the cooling system should show no pressure when the engine is cold.
OEM vs. Aftermarket
OEM radiators are generally the safer choice given how directly this part affects engine longevity, though reputable aftermarket brands with genuine OEM-equivalent specifications are a reasonable, cheaper alternative. Budget unbranded radiators are where most repeat-failure complaints cluster — this is not a part worth cutting corners on.
More Jaguar Radiator Guides
The same part, covered across other Jaguar models.