Car Parts Guide
ENGINE MOUNT Jaguar XF · PARTS GUIDE

Jaguar XF Engine Mount: Specs, Fitment & Common Faults

On the XF, these are active mounts relying on a vacuum connection, and checking the pipe is still attached is worth doing before assuming the mount has failed — plus a money-saving check on the cheap exhaust damper first.

Jaguar XF (X260 2015 ON) engine mount positions Illustration for editorial purposes
Find Jaguar XF Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

No aftermarket reference verified for this generation

Accuracy note: Covers the Jaguar XF (X260 2015-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine mounts (aftermarket)No reliable aftermarket reference found for this generation — order against your VIN
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

How the XF isolates engine vibration

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the XF use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: JAGUAR XF ENGINE MOUNT & GEAR MOUNT REPLACE

Watch on YouTube ↗
Jaguar XF Engine Mount reference plate
Find Jaguar XF Engine Mount Here!

Opens live listings in a new tab.

How active mountings work on the XF

This is important to understand about how these mounts actually work: they're active mounts that rely on a vacuum connection to function properly, rather than being simple, passive rubber blocks. It's worth checking that the vacuum pipe is actually still connected to each mount before assuming a mount has failed, since a pipe that's come loose will cause noticeable vibration on its own.

The rear exhaust damper, typically costing only around £30 to £40, has been documented as a known cause of vibration on related models, worth checking this considerably cheaper part before committing to the more expensive engine mounts. Genuine engine mounts have been quoted at around £400 for a single mount or £480 for a pair through a dealer, while a specific aftermarket pair has been documented costing around £95, with the same mounts and part numbers used across the XE and this model.

One case saw a specialist diagnose a vibration as the timing chain failing, despite separately confirming the engine mount wasn't providing enough vacuum suction and replacing it — yet remaining adamant the timing chain was also failing, despite no warning light and the car driving perfectly normally.

Vibration at idle on the XF, the job and aftermarket choice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Jaguar models.