Kia Sportage Master Clutch Cylinder: Specs, Fitment & Common Faults
Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
When the Sportage's clutch fault is hydraulic
On the Kia Sportage, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.
ClickMechanic's average for a Kia master cylinder replacement is about £206, the lowest of the brands it lists and close to the UK average of around £200. Labour usually runs from one to three hours.
Rule out the rest firstA soft or sinking pedal on a manual Sportage can come from three places: the master cylinder, the slave cylinder, or air in the system. Air is the cheapest to fix. If the clutch was replaced recently and the pedal has felt odd since, ask for the system to be bled before buying parts.
The release side matters too. Schaeffler's guide for the 2013 Sportage 1.7 CRDi warns that a worn release bearing guide tube stops the bearing returning fully. The resulting over-stroke can feel like a hydraulic problem at the pedal, but a new master cylinder won't fix it.
A quick checkWith the engine off, press the pedal and hold it. If it creeps slowly towards the floor and there's no leak at the gearbox, the master cylinder seals are letting fluid bypass.
On the Kia Sportage, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.
Part numbers| OEM reference | Varies by engine/transmission — confirm via VIN |
|---|---|
| Common aftermarket brands | Sachs, LUK, Febi Bilstein, ATP |
Engine, gearbox and drive side: fitment on the Sportage
This part is not necessarily interchangeable across every Sportage generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Kia Sportage from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.
Opens live listings in a new tab.
Typical failures, the DIY job and which brands to trust
These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.