Land Rover Discovery Cabin Air Filter: Intervals, Fitment & Warning Signs
What looks like the filter behind the glovebox can actually just be the blower, with the real filter's location varying by model — plus a clarification that cleaning alone won't meaningfully improve performance.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket pollen filters: Mann CU1919 / Mahle LA395
| Cabin filter, standard (aftermarket) | Mann CU1919, Mahle LA395, Hengst E2945LI |
|---|---|
| Activated-carbon version (aftermarket) | No carbon version listed separately for this generation |
| Genuine (OE) number | Not quoted in the catalogue listings — the fitted filter varies by trim and build date, so order the genuine one against your VIN |
| Fitment notes | Standard and carbon filters have different numbers, and the right size depends on trim and build date. Check which type your car was built with before ordering. |
What a clogged pollen filter does to the Discovery's heater
On the Land Rover Discovery, this part sits in an unusual category: neglecting it changes nothing about how the car drives, so there's no natural prompt to replace it. It only affects the air you're breathing inside the cabin, which is why it's so often left well past its interval.
How the Discovery cleans the air coming through the vents
Every bit of air blown through the Land Rover Discovery's cabin vents passes through this filter first, which is what traps dust and pollen — plus some odours and pollutants if it's an activated-carbon type. It has nothing to do with the engine air filter, a wholly separate component built for the combustion side of things.
Watch: replacing itOpens live listings in a new tab.
A hidden housing on the Discovery
If you're looking behind the glovebox and can't seem to find the cabin filter, one case saw an owner look behind the glovebox and find something that looked plausible, only to later realise it was actually the blower assembly, not the filter at all, with the actual filter positioned elsewhere depending on the specific model. It's worth confirming you've actually found the filter itself rather than a similar-looking component before assuming it isn't there. On some models, accessing the filter behind the glovebox requires the ignition to be switched on, with the climate control set to manual mode and recirculation mode engaged, worth checking this specific combination if the access panel won't behave as expected.
The cabin air intake on this design has been criticised by owners for lacking any kind of wire mesh screen to help keep larger debris and leaves out in the first place, worth checking and clearing this intake area periodically given this design characteristic.
Warning signs, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Cabin Air Filter Guide for signs it needs changing, confirming fitment against your VIN, and choosing standard, carbon, or HEPA media.
The same part on other modelsThe same part, covered across other Land Rover models.