Car Parts Guide
ENGINE MOUNT Lexus NX · PARTS GUIDE

Lexus NX Engine Mount: Specs, Fitment & Common Faults

On the NX, a confirmed technical bulletin on related models addresses an exhaust drone that can mimic a bad engine mount.

Lexus NX (2014-2021) engine mount positions: front, left Illustration for editorial purposes
Find Lexus NX Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket mountings: Febi 196294 / Swag 33112104

Accuracy note: Covers the Lexus NX (2014-2021) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine Mount — Front lower (aftermarket)Febi 196294, Swag 33112104
Engine Mount — Front (aftermarket)Kavo EEM-10069
Engine Mount — Left (aftermarket)Kavo EEM-10137
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

Torque, movement and the NX's mountings

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the NX use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: 08 Toyota Rav4 Rear Engine Motor Mount Replacement - 2.4L 2AZ FE - 4WD - Automatic

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Lexus NX Engine Mount reference plate
Find Lexus NX Engine Mount Here!

Opens live listings in a new tab.

Vibration under acceleration on related Lexus models

If you're facing a vibration while accelerating, documented cases on related Lexus models describe a confirmed technical service bulletin addressing an exhaust drone issue that can feel remarkably similar to a bad engine mount, worth ruling out first. It's also worth confirming your exact powertrain, gas or hybrid, before ordering a replacement mount, since these aren't always interchangeable between the two.

One documented case on a related model saw an engine mount replaced due to excessive vibration, only for the noise and vibration to persist, with the manufacturer reportedly aware of the issue but without a solution at the time — severe enough that the owner eventually switched to a different manufacturer entirely.

Shifting into neutral or park and seeing whether a vibration disappears can help confirm a mount is the cause, and that these mounts are often fluid-filled, with a visual check for black or dark oily residue confirming a failure — worth knowing these can leak at surprisingly low mileage.

Vibration at idle on the NX, the job and aftermarket choice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Lexus models.