Lexus NX Rear Bumper: Fitment, Sensors & Common Damage
On the NX, disconnecting the camera making no difference to a black screen, but wiggling the wires causing interference, points to a wiring fault rather than the camera itself.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Blic 5506-00-8166952P
| Rear bumper covers (aftermarket) | Blic 5506-00-8166952P (Rear, from 07.2014, to 09.2017); Blic 5506-00-8166951Q (Rear, Colour: black, from 07.2014); Blic 5506-00-8166950P (Rear, from 07.2014); Blic 5506-00-8166951P (Rear, with holes for parking sensors, from 01.2018, to 12.2020) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Why a reversing knock on the NX costs more than it looks
It's rarely a plain plastic panel on the Lexus NX: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.
What sits behind the paint at the back of the NX
Beyond absorbing minor impacts, the rear bumper on higher trims of the NX often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| Standard trims | Eminent White, Atomic Silver, Nebula Grey, Caviar Mica |
|---|---|
| F Sport | Ultra White and Ultrasonic Blue Mica 2.0 are exclusive to F Sport, not available on other trims; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
A camera screen gone completely dark
If the reversing camera screen has gone completely dark, documented cases on related Lexus models describe disconnecting the camera making no difference to a black screen, yet wiggling the wiring sometimes causing interference to appear — pointing toward a wiring fault rather than the camera itself.
Note too that retrofitting a genuine OEM reversing camera to a car that didn't come with one can be more involved than simply plugging in a camera.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Lexus models.