Mazda 6 Tail Lights: Specs, Fitment & Common Faults

On the Mazda 6, a genuine Mazda technical bulletin explains light condensation as normal, with newer clear-lens models simply making it more visible.

Illustration for editorial purposes

OEM Part Numbers

Accuracy note: we weren't able to verify a confident Mazda 6 tail lights part number at the time of writing. Please confirm the correct part via a Mazda dealer or parts specialist using your VIN.

Confirmed: A Genuine Technical Bulletin Worth Knowing About — Mazda 6 Tail Lights

This is genuinely worth knowing if you're seeing light condensation: Mazda has a specific technical service bulletin explaining that condensation inside combination light units is a normal phenomenon, caused by a temperature difference between the inside and outside of the housing. This bulletin specifically notes that newer models fitted with a clear lens can make this normal condensation considerably more visible than on older models with a coloured lens.

A genuinely detailed, real diagnostic distinction worth knowing if condensation seems excessive: a gasket-based leak is more common than a cracked seam, tending to show water entering specifically around the gasketed mounting points. A cracked seam typically shows minor condensation around the crack first, with a hazy or whitish spot at the seam worth looking for closely.

It's also genuinely worth knowing that all four light units showing water simultaneously points away from four separate light failures and toward a failed rear window seal or boot weatherstripping instead.

More Wiring Behind There Than Most People Assume

A tail light unit typically bundles several functions into one housing — brake light, indicator, reversing light and rear fog light — which means a single electrical fault can affect more than one function at once, and a "faulty tail light" can mean several genuinely different things.

Before you buy: tail light design and bulb type vary by trim and facelift status. Always confirm against your VIN before ordering.

What It Does

Beyond basic rear visibility, tail light units on the 6 typically integrate brake lights, indicators, reversing lights and rear fog lights into a single housing. Higher trims may use LED units with a distinct light signature, which are not interchangeable with standard halogen units even if the physical mounting looks similar.

Fitment & Compatibility

Generations & Tail Light Type

Standard trims	Halogen bulb-based units as standard
Higher trims, later model years	LED tail lights become available further up the range, genuinely a different assembly and connector from the halogen units on lower trims

Tail light design changed between generations of the 6, and facelifted versions within the same generation often use a revised light signature that isn't interchangeable with pre-facelift units. Always confirm the exact part for your specific model year before ordering. Whether you're sourcing a replacement tail lights for your Mazda 6 from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.

Common Faults, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Tail Lights Guide for diagnosing which circuit has failed, how easy this job is to DIY, and aftermarket advice.

More Mazda Tail Lights

The same part, covered across other Mazda models.

Mazda 6 Tail Lights: Specs, Fitment & Common Faults

OEM Part Numbers

Confirmed: A Genuine Technical Bulletin Worth Knowing About — Mazda 6 Tail Lights

Shop for This Part on eBay