Mazda CX-3 Headlights: Specs, Fitment & Common Faults
Bulb type, unit part numbers, and the faults that actually cause that flickering or dim light you've noticed.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — aftermarket LH Van Wezel 2791961 / RH TYC 20-11529-25-2
| Passenger side (LH / nearside) headlight — aftermarket | Van Wezel 2791961 (halogen H11/H15, DRL, electric levelling cars, no motor, not for facelift); Alkar 2741674 (halogen H15, H11, W5W); Abakus 216-1173L-LDEM2 (halogen H11/H15, W5W, no motor); Abakus 216-1166L-LD-EM (halogen H11, HB3, PY21W, W5W, electric); Alkar 2741652 (halogen H7/HB3, W5W, PY21W); Abakus 216-1158L-LDEM2 (halogen H11/HB3, yellow indicator) |
|---|---|
| Driver's side (RH / offside) headlight — aftermarket | Van Wezel 2791962 (halogen H11/H15, DRL, electric levelling cars, no motor, not for facelift); Diederichs 5645080 (halogen H11/H15, DRL, levelling cars, no motor); Alkar 2742674 (halogen H15, H11, W5W); TYC 20-11529-25-2 (halogen H11/H9, electric levelling, no motor); Alkar 2742652 (halogen H7/HB3, W5W, PY21W, electric); Abakus 216-1158R-LDEM2 (halogen H11/HB3, electric) |
| Bulb types | dipped H11, daytime running H15; alternative H7/HB3; indicator PY21W; sidelight W5W; H4 on basic units |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine units against your VIN |
| Fitment notes | Every unit listed is halogen with no LED or xenon option; the Van Wezel and Diederichs H11/H15 units include a DRL function, and the Van Wezel units are not for the facelift. |
A Genuinely Important UK Rule Worth Knowing Before You Buy — Mazda CX-3 Headlights
If your CX-3 has factory-fitted halogen headlamp housings, converting them to fit LED bulbs is treated as a definite MOT failure under the current inspection manual — this isn't a grey area or a minor advisory, since a housing designed for halogen doesn't distribute an LED bulb's light output correctly, which can genuinely dazzle oncoming drivers. If you want a genuine LED upgrade, the correct route is a complete headlight unit designed for LED from the factory, not a bulb swap into an existing halogen housing.
Mazda CX-3 Headlights: Watch: Replacing It
Generic Mazda video that came up for both CX-3 and Mazda 2 queries; model/gen not verified. No CX-3-specific bulb video found
Mazda CX-3 Headlights: What It Does
On the Mazda CX-3, the main and dipped beams, whether conventional bulbs or LED/matrix modules on higher trims, sit inside the headlight unit at an angle calculated to illuminate the road without dazzling other drivers. Many modern units also combine the daytime running light and indicator into that same housing, adding a layer of complexity to both part numbers and repairs.
Mazda CX-3 Headlights: Generations & Headlight Type
| Standard trims | Halogen as standard on entry trims |
|---|---|
| Sport/higher trims | Full LED headlights with automatic on/off become available, genuinely a different assembly and connector from the halogen units on lower trims — not a simple bulb swap |
Opens live listings in a new tab.
Mazda CX-3 Headlights: Common Faults, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Headlights Guide for the four bulb technologies and how they differ, UK law on aim and modifications, common faults to check for, how difficult this job is to DIY, and confirming fitment against your VIN.
More Mazda Headlights
The same part, covered across other Mazda models.