Mazda CX-3 Radiator: Specs, Fitment & Common Faults

On the CX-3, the coolant reservoir genuinely differs by turbo vs non-turbo and even build location — always verify against your VIN.

Illustration for editorial purposes

OEM Part Numbers

Manual gearbox, all engines	Standard radiator with no transmission cooling circuit
Automatic, pre-Skyactiv generations	Transmission fluid cooler integrated directly into the radiator's tank as a separate internal chamber — if this fails internally, coolant and transmission fluid can cross-contaminate into a pink, milky "strawberry milkshake" fluid
Automatic, Skyactiv-era models	Some Skyactiv models use a genuinely different, compact liquid-to-liquid heat exchanger mounted directly on the transmission case itself rather than a tank built into the radiator, while others (confirmed on some CX-5/Mazda 6 model years) retain the traditional radiator-integrated design — this genuinely varies by specific model and generation, so confirm your exact setup before ordering rather than assuming one approach applies across the whole Skyactiv range

Accuracy note: genuinely worth knowing: Mazda sometimes fits a heavier-duty radiator as standard on CX-3 trims with towing packs or higher-accessory-load options — worth confirming your exact spec rather than assuming the base-model rating applies.

A Genuinely Important Fitment Warning Worth Knowing Before Ordering — Mazda CX-3 Radiator

If you're replacing the coolant reservoir specifically, this is genuinely worth knowing: fitment is considerably more complex than it might first appear, with real differences depending on whether your engine is turbocharged or non-turbo, and even on which factory the car was built in. Always verify against your specific VIN and visually match the part before buying.

A genuinely specific diagnostic detail worth knowing if chasing a subtle thermostat housing leak: rather than an obvious crack across the housing itself, a failing gasket or seal commonly manifests as weeping specifically around one of the housing bolts — worth checking this precise spot closely before assuming the housing itself needs replacing.

It's also worth knowing that a coolant bypass pipe near the thermostat housing on some Mazda diesel engines has been documented deteriorating with age and heat cycles, worth checking if you have an older diesel model experiencing unexplained coolant loss.

The Part That Keeps Everything Else From Cooking

Nothing about this component is glamorous, but almost every serious engine failure that isn't wear-related traces back to a cooling system problem left unaddressed. Catching the early signs here is genuinely cheap insurance against a much bigger bill.

Before you buy: radiator size and design vary significantly by engine size, transmission type, and whether your car has air conditioning. Always confirm against your VIN before ordering.

What It Does

The radiator transfers heat from the engine coolant to the surrounding air, keeping engine temperature within a safe operating range. On automatic versions, it often also cools transmission fluid through a separate internal circuit — one more reason the correct part number matters so much here.

Faults, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Mazda Radiator

The same part, covered across other Mazda models.

Mazda CX-3 Radiator: Specs, Fitment & Common Faults

OEM Part Numbers

A Genuinely Important Fitment Warning Worth Knowing Before Ordering — Mazda CX-3 Radiator

Shop for This Part on eBay