Car Parts Guide
CLUTCH KIT Mazda CX-5 · PARTS GUIDE

Mazda CX-5 Clutch Kit: Specs, Fitment & Common Faults

The warning signs of a wearing clutch, and what actually fits your specific engine and gearbox.

Mazda CX-5 (2012-2017) clutch kit, 240mm, OEM PE01-16-460 Illustration for editorial purposes
Find Mazda CX-5 Clutch Kit Here!

Opens live listings in a new tab.

Mazda CX-5 Clutch Kit reference plate

OEM Part Number: PE01-16-460

Engines with a dual-mass flywheel need the flywheel checked and, if worn, replaced alongside the clutch — some kits are explicitly sold on this basis, since fitting a fresh clutch onto a worn dual-mass flywheel leads to premature failure of the new clutch too.
Manual variants, genuine Mazda clutch referenceMazda OEM: PE01-16-460
Manual variants, aftermarket cross-referenceLuK: 624 3909 00 — 240mm diameter, includes release bearing and clutch disc; sold with the instruction to check and replace the dual-mass flywheel if worn
Genuine Mazda clutch release cylinderMazda OEM: BFD1-41-920 (also cross-referenced as BFD1-41-920B, KB7W-41-920)

Mileage means little: what wears the CX-5's clutch

On the Mazda CX-5, unlike parts that fail on a predictable mileage schedule, clutch wear varies enormously based on driving style — a clutch that's ridden gently in easy traffic can outlast one used hard for towing or aggressive launches by a huge margin.

Rule out the gear lever first

An owner of a 2014 CX-5 2.2 diesel manual on the Mazdas247 forum had trouble getting reverse, first and second, an uneven bite point in the lower gears and a jerky pull-away. Before paying for a clutch, he tried a fix from a Mazda service bulletin for manual Mazda3s built before November 2013: releasing a clip and repositioning the gear lever. It took under five minutes, and he reports the gearbox and clutch felt much better afterwards. He assumed the CX-5's set-up was similar. It's a cheap thing to have checked before the gearbox comes out.

Real clutch wear shows as slip under load (revs rising without the car speeding up), a bite point that has crept high, or a burning smell after a hill start.

Typical cost

The UK average for a clutch replacement is about £670 (whocanfixmycar figures quoted by the RAC).

Before you buy: clutch specification varies by engine size and torque output — a kit rated for a smaller engine won't necessarily cope with a more powerful version. Always confirm against your VIN before ordering.

Engaging and disengaging drive on the CX-5, explained

The clutch kit — typically comprising the clutch plate, pressure plate and release bearing — manages the connection between the engine and gearbox on manual versions of the CX-5, allowing smooth engagement and disengagement when changing gear. Higher-torque engine variants use a heavier-duty kit rated to handle the extra load without premature wear.

Find Mazda CX-5 Clutch Kit Here!

Opens live listings in a new tab.

When to replace, whether to try it at home, and what to buy

These are the same regardless of make or model — see our full Clutch Kit Guide for symptoms of wear, confirming fitment against your VIN, and aftermarket advice.