Car Parts Guide
FUEL PUMP Mazda CX-5 · PARTS GUIDE

Mazda CX-5 Fuel Pump: Specs, Fitment & Common Faults

On the CX-5, a serious UK safety recall (R/2021/435) covers a fuel pump impeller that can crack and cause stalling.

Mazda CX-5 (2012-2017) fuel pump, petrol / diesel, aftermarket Bosch 0 580 454 094 Illustration for editorial purposes
Find Mazda CX-5 Fuel Pump Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket units: Bosch 0 580 454 094 / Pierburg 7.21440.51.0

Accuracy note: Covers the Mazda CX-5 (KE 2012-2017) as listed in the UK aftermarket catalogues. In-tank fuel pumps are sold two ways: as a complete feed unit (the pump in its swirl pot with the fuel-level sender and float) or as a bare pump that is fitted into the old housing, and petrol and diesel versions are not interchangeable — most diesels have only a low-pressure lift pump in the tank, with the high-pressure pump on the engine. The references below are UK aftermarket catalogue listings for this generation, labelled by brand; genuine numbers are shown only where a listing quotes one. Check fuel type, the plug pin count and whether your car has one sender or two (saddle tanks on 4x4 and some larger cars) against your VIN before ordering.
Fuel pumps / feed units (aftermarket)Bosch 0 580 454 094 (bare in-tank pump, supply module type); Delphi FE0429-12B1 (bare in-tank pump, petrol, 113 x 38 mm, metal housing, without pressure sensor and without seal); Engitech ENT100053 (bare in-tank pump, 4 bar / 125 l/h, 2 connectors, 54.5 mm body, 188 mm); Ridex 458F0005 (bare in-tank pump, 3.3 bar / 100 l/h, 38 mm body, 115 mm, 10 mm in / 9 mm out); Ridex 458F0040 (bare in-tank pump, 3.4 bar / 100 l/h, 2 connectors); Pierburg 7.21440.51.0 (pre-supply / lift pump, 0.3-0.4 bar, 2 connectors, 12 V 2 A, 133.5 mm, for the diesel); Meat & Doria 76416 (bare in-tank pump, 3 bar / 95 l/h).
Types & variantsBare in-tank pumps for the petrol engines and low-pressure lift pumps for the 2.2 D diesel; no complete CX-5 module with sender is offered in this range. The diesel options are the Pierburg 7.21440.51.0 and Ridex 458F0008 (0.27-0.38 bar), while the petrol options run 3-4 bar.
Genuine (OE) numbers quoted3111137300 (Meat & Doria 76385 / Hoffer 7506385); 170429F500 (Meat & Doria 76416 / Hoffer 7506416); 142504 (Kamoka 8410016); 8450008680 (Kamoka 8410005). No Mazda numbers are quoted.
Fitment notesThe pump is transplanted into the original Mazda module with the sender kept, so a faulty fuel gauge is not cured by any of these parts. Order strictly by fuel type, and check body diameter and outlet against the old pump before fitting.

Whether the CX-5 is covered by a fuel system recall

Mazda issued a UK safety recall (reference R/2021/435) covering models manufactured between October 2017 and September 2019, for a fault in the low-pressure fuel pump manufactured by Denso — the plastic impeller inside can crack and deform, potentially causing the pump to fail and the engine to stall while driving or fail to start. Around 27,000 UK-registered vehicles were covered, with the fix being a full replacement pump fitted free of charge.

A pre-failure pump can produce intermittent stalling that a basic roadside pressure test doesn't catch — one case saw a breakdown recovery service find no fault via pressure testing, despite the car repeatedly cutting out, with the recall replacement ultimately resolving it completely.

Bear in mind that dealers commonly ask that the fuel tank be no more than a quarter full before the appointment, and that some documented cases saw a noticeable amount of fuel go missing during the process. An evaporative emissions fault code appearing shortly after this specific recall work has also been documented in some cases.

How heat and low fuel shorten the CX-5's pump life

On the Mazda CX-5, there's rarely a convenient time for this to fail — it tends to strike mid-journey rather than while the car's sitting safely on the drive. Knowing what the early symptoms look like buys valuable time to get ahead of it.

Watch: replacing it

🎬 Watch: HOW TO REMOVE FUEL PUMP ASSEMBLY MAZDA CX5 PART 1

Watch on YouTube ↗

Generation not stated in title; part 1 of a series

Mazda CX-5 Fuel Pump reference plate
Before you buy: fuel pump specifications vary by engine size and fuel type, and petrol/diesel versions are never interchangeable. Always confirm against your VIN before ordering.
What it does

The job here is simple in principle — draw fuel from the tank, deliver it to the engine at the right pressure — but the Mazda CX-5's fuel pump sits submerged inside the tank, which makes physical access for replacement far more involved than the small part itself implies.

Matching the right pump to your CX-5

Accuracy note: these are documented patterns by generation and engine family, not a substitute for confirming your exact engine code — always verify against your V5C before ordering, since petrol and diesel pumps are never interchangeable.
KE (2012–2016), SkyActiv-G petrol & SkyActiv-D dieselSpans both diesel (in-tank lift pump plus an engine-mounted high-pressure pump) and petrol (in-tank low-pressure pump, plus a separate high-pressure pump if direct-injection) variants — confirm your exact engine before ordering
KF (2017–present), SkyActiv-G petrol & SkyActiv-D dieselSpans both diesel (in-tank lift pump plus an engine-mounted high-pressure pump) and petrol (in-tank low-pressure pump, plus a separate high-pressure pump if direct-injection) variants — confirm your exact engine before ordering
Find Mazda CX-5 Fuel Pump Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Fuel Pump Guide for symptoms to watch for (including the low-pressure vs high-pressure distinction on direct-injection engines), confirming fitment against your VIN, and OE suppliers worth knowing.

The same part on other models

The same part, covered across other Mazda models.