Mazda CX-5 Master Clutch Cylinder: Specs, Fitment & Common Faults
Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Pedal to the floor on the CX-5: where the fault often lies
On the Mazda CX-5, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.
The manual CX-5 uses a release cylinder bolted to the outside of the gearbox (see our slave cylinder page for the part). That helps when you're working out which half of the system has failed. With the slave visible, you can check it for wet patches or a weeping rubber boot. If it's dry and the reservoir level hasn't dropped, but the pedal still sinks or feels soft, the master cylinder is the more likely cause.
Before you replace anythingOn a CX-5 with trouble selecting gears, rule out the gear lever first. One owner on the Mazdas247 forum improved a notchy change with a repositioning fix from a Mazda bulletin for the Mazda3 (more on our clutch kit page). A pedal that returns slowly, or feels heavier one moment and lighter the next, points more firmly at the hydraulics.
Typical costClickMechanic puts the UK average for a master cylinder replacement at about £200, with most jobs between £140 and £275.
On the Mazda CX-5, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.
Part numbers| OEM reference | Varies by engine/transmission — confirm via VIN |
|---|---|
| Common aftermarket brands | Sachs, LUK, Febi Bilstein, ATP |
How to confirm the correct part for the CX-5
This part is not necessarily interchangeable across every CX-5 generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Mazda CX-5 from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.
Opens live listings in a new tab.
What goes wrong, whether to fit it yourself, and what to buy
These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.