Car Parts Guide
CABIN AIR FILTER Mitsubishi ASX · PARTS GUIDE

Mitsubishi ASX Cabin Air Filter: Intervals, Fitment & Warning Signs

On the ASX, a musty smell that survives a fresh filter often points toward mould on the evaporator itself, not the filter.

Mitsubishi ASX (2010 ON) cabin air filter, standard Febi 27829, activated carbon Febi 29308 Illustration for editorial purposes
Find Mitsubishi ASX Cabin Air Filter Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket pollen filters: Febi 27829 / Valeo 715631

Accuracy note: Covers the Mitsubishi ASX (2010-) as listed in the UK aftermarket catalogues. A cabin filter is a cheap part, but it is bought by number, and the number depends on whether your car was built with a standard particulate filter or an activated-carbon one, as well as on trim and build date. The references below are aftermarket catalogue listings for this generation, grouped by brand; the carmaker's own number is not quoted in those listings, so check the genuine filter against your VIN if you want a guaranteed match. Carbon versions carry their own numbers and are listed separately.
Cabin filter, standard (aftermarket)Febi 27829, Valeo 715631, Blue Print ADC42511, Filtron K1241
Activated-carbon version (aftermarket)Febi 29308, Blue Print ADBP250048, Filtron K 1241A
Genuine (OE) numberNot quoted in the catalogue listings — the fitted filter varies by trim and build date, so order the genuine one against your VIN
Fitment notesStandard and carbon filters have different numbers, and the right size depends on trim and build date. Check which type your car was built with before ordering.

Ten minutes and a new pollen filter for the ASX

Of everything covered for the Mitsubishi ASX, this is about as low-stakes mechanically as it gets — it doesn't touch how the car drives at all. Its only job is cabin air quality, which is exactly why owners tend to ignore it until something makes that hard to do.

Before you buy: filter size and whether your car uses a standard or activated-carbon filter varies by trim. Always confirm against your VIN before ordering.

The air path from scuttle to vents

On the Mitsubishi ASX, this filter sits in the ventilation intake, not the engine bay, and cleans the air reaching the cabin — trapping dust, pollen, and on carbon-activated versions, some odours and pollutants too. The engine air filter is a completely different part, serving combustion rather than the cabin.

Watch: replacing it

🎬 Watch: How To: Replace Mitsubishi ASX Cabin Air Filter

Watch on YouTube ↗
Mitsubishi ASX Cabin Air Filter reference plate
Find Mitsubishi ASX Cabin Air Filter Here!

Opens live listings in a new tab.

Mould on the evaporator, not the filter

If a musty smell survives fitting a fresh cabin filter, this often points toward mould on the evaporator itself rather than the filter, which a relatively cheap aerosol treatment can usually resolve rather than needing another filter change. A soaked, waterlogged filter, on the other hand, indicates the scuttle panel or door seals are letting water past — worth finding and fixing this actual leak before the cabin carpet becomes a permanent, ongoing problem.

That said, a blower motor going noisy or losing its top speed after years of use is more likely down to worn bearings or a failing resistor than the filter itself — worth having this checked separately if a fresh filter doesn't resolve reduced airflow.

Also, on related Mitsubishi models used in dusty or off-road conditions, the filter can block well ahead of the standard mileage-based interval, worth checking more frequently if your typical use is dusty rather than sticking rigidly to a schedule intended for normal road use.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Cabin Air Filter Guide for signs it needs changing, confirming fitment against your VIN, and choosing standard, carbon, or HEPA media.

The same part on other models

The same part, covered across other Mitsubishi models.