Mitsubishi Mirage Front Suspension Strut: Specs, Fitment & Common Faults
On the Mirage, a loud metallic bang from the front under hard acceleration over minor bumps has been documented by multiple owners on related models.
Opens live listings in a new tab.
OEM Part Number: 4060A379
Front strut, as quoted in catalogue listings, confirm via VIN. Aftermarket struts Bilstein 19-227863 / KYB 3320014
| Front strut / shock absorber (aftermarket) | KYB 3320014 (Excel-G, gas twin-tube); KYB 3320010 (Excel-G); Bilstein 19-227863 (B4, gas twin-tube); TRW JGM1251T (45 mm, 20 mm rod); TRW JGM1213T (51 mm, 22 mm rod); Japanparts MM-50092; Ridex 854S19244 |
|---|---|
| Front lower arm / wishbone (aftermarket) | LH Delphi TC7913 (with ball joint), Sidem 71678, FAG 821 1237 10 (with ball joint, 14.9 mm cone), Optimal G6-2054; RH Delphi TC7912 (with ball joint), Sidem 71679, Optimal G6-2055; Moog MI-WP-15423/15424 and A.B.S. 212213/212214 (with ball joint and rubber mount, side not stated) |
| Top mount / strut bearing (aftermarket) | Metalcaucho 58425 (ball bearing, ID 36 mm, dia 64 mm); NTY AD-MS-004 (plastic bearing, ID 30 mm); GSP 519008; Ridex 1180S0053 (no ball bearing); KYB SM1032 and SM5657 (mounting kits); Magnum A78014 |
| Genuine (OE) numbers quoted | Japanparts MM-50092 front shock absorber: 4060A379. None quoted for arms or mounts. |
| Fitment notes | Standard gas twin-tube only; two strut diameters (45 mm and 51 mm) appear, so check the existing strut. The mount list looks mixed and is unreliable on bearing type. |
How the Mirage's suspension soaks up the road before you feel it
On the Mitsubishi Mirage, these components absorb every pothole, bump and cornering force before any of it reaches the cabin, which is why deterioration here rarely announces itself with one obvious symptom. Working through it methodically finds the actual cause faster than guessing ever will.
Spring, damper and top mount: the Mirage's front corner explained
The Mitsubishi Mirage's front strut does two jobs in one unit — damping the suspension's movement and providing the coil spring's mounting point. Wear here shows up as excessive bounce after bumps rather than a quick settle, and left long enough, uneven tyre wear tends to follow.
Watch: replacing it2012+ Mirage/Space Star front strut
Opens live listings in a new tab.
What causes a loud bang over small bumps on the Mirage
If you're hearing a loud metallic bang from the front suspension when accelerating hard over a minor road imperfection, multiple owners on related Mitsubishi models have documented exactly this symptom, suggesting the suspension may be bottoming out under this particular combination of hard acceleration and a minor bump.
Note too that a known issue at one end of the car doesn't rule out a separate, genuine fault at the other — worth being specific and clear about exactly which corner a noise is coming from rather than accepting a repair to the wrong area.
Warning signs, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Front Suspension Strut Guide for symptoms of worn bushings and ball joints, confirming fitment against your VIN, and rubber vs polyurethane guidance.
The same part on other modelsThe same part, covered across other Mitsubishi models.