Nissan Qashqai Slave Clutch Cylinder: Specs, Fitment & Common Faults
The other half of the hydraulic clutch system, and the faults that get mistaken for a failing master cylinder.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Pedal-end and gearbox-end faults on the Qashqai compared
On the Nissan Qashqai, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal, a clutch that won't disengage properly — which means diagnosing which one has actually failed usually needs a proper inspection rather than guesswork.
Two clip positionsSchaeffler's guide for a 2014 Qashqai 1.5 dCi shows a concentric slave cylinder with a pipe connector that has two clip positions, one for bleeding and one for normal running. If the clip is left in the bleed position, the pipe isn't fully locked and the pedal can feel wrong.
Febi Bilstein lists the earlier 1.6 petrol (2006–2014) with the same style of connector and says to bleed it by hand. Ease the pipe out about 5mm with the clip held, press the pedal until the fluid runs clear, then click it home. No vacuum or pressure bleeders, since they can damage the seals.
Flush the fluidThe same Schaeffler guide warns that old, contaminated fluid can wreck a new slave cylinder's seal. A full flush costs little next to a second gearbox removal.
Typical costThe slave is inside the bell housing, so expect a bill close to a clutch job. The average Nissan clutch replacement is about £614 (whocanfixmycar figures quoted by the RAC).
The slave cylinder receives hydraulic pressure from the master cylinder and uses it to physically push the clutch release mechanism, disengaging the clutch when the pedal is pressed. On many modern cars including several versions of the Qashqai, this is built inside the transmission housing as a "concentric slave cylinder," which changes both the part itself and the labour involved in replacing it.
Internal or external: what fits the Qashqai
Whether the Qashqai uses an internal (concentric) or external slave cylinder depends on the specific generation and transmission — these two designs are not interchangeable, and use entirely different part numbers and replacement procedures. Always confirm which type your specific car uses before ordering. Whether you're sourcing a replacement slave clutch cylinder for your Nissan Qashqai from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.
Opens live listings in a new tab.
Warning signs, fitting difficulty and aftermarket choice
These are the same regardless of make or model — see our full Slave Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.