Car Parts Guide
CLUTCH KIT Peugeot 208 · PARTS GUIDE

Peugeot 208 Clutch Kit: Specs, Fitment & Common Faults

The warning signs of a wearing clutch, and what actually fits your specific engine and gearbox.

Peugeot 208 (2012-2019) clutch kit, 200mm / 240mm, OEM 1606876580 Illustration for editorial purposes
Find Peugeot 208 Clutch Kit Here!

Opens live listings in a new tab.

Peugeot 208 Clutch Kit reference plate

OEM Part Number: 1606876580

Engines with a dual-mass flywheel need the flywheel checked and, if worn, replaced alongside the clutch — several genuine kits are explicitly sold on this basis, since fitting a fresh clutch onto a worn dual-mass flywheel leads to premature failure of the new clutch too.
1.4 HDi manual, complete kit (200mm)Genuine cross-reference: 1606876580, 1610872680, 1610872780, 1611266780
1.0/1.2 petrol manual, complete kitLuK reference: 620326800 — includes pressure plate, release bearing and clutch disc
Engines with dual-mass flywheel, complete kit (240mm)LuK reference: 624 3947 00 — sold with the instruction to check and replace the dual-mass flywheel if worn

Making the 208's clutch last longer

On the Peugeot 208, unlike parts that fail on a predictable mileage schedule, clutch wear varies enormously based on driving style — a clutch that's ridden gently in easy traffic can outlast one used hard for towing or aggressive launches by a huge margin.

Signs it's the clutch, not the hydraulics

Carwiki's 208 guide lists the usual signs of a worn clutch: revs rising without the car accelerating, a heavier pedal, judder on take-up, a change in pedal feel, difficulty getting into gear and a burnt smell. A pedal that stays on the floor is different. It points to the hydraulics, usually the slave cylinder, which can be a much cheaper repair.

The same guide recommends replacing the plate, pressure plate and release bearing together, and checking the dual-mass flywheel at the same time on the engines that have one. The 240mm DMF kit listed above is sold with that instruction.

Typical cost

Carwiki puts a workshop clutch change on the 208 at roughly €500 to €800 in Germany. In the UK, the average Peugeot clutch job comes to about £674 (whocanfixmycar figures quoted by the RAC).

Before you buy: clutch specification varies by engine size and torque output — a kit rated for a smaller engine won't necessarily cope with a more powerful version. Always confirm against your VIN before ordering.

Friction, springs and a release bearing: the 208's drive link

The clutch kit — typically comprising the clutch plate, pressure plate and release bearing — manages the connection between the engine and gearbox on manual versions of the 208, allowing smooth engagement and disengagement when changing gear. Higher-torque engine variants use a heavier-duty kit rated to handle the extra load without premature wear.

Find Peugeot 208 Clutch Kit Here!

Opens live listings in a new tab.

Signs of wear, labour costs and quality replacement sets

These are the same regardless of make or model — see our full Clutch Kit Guide for symptoms of wear, confirming fitment against your VIN, and aftermarket advice.