Car Parts Guide
MASTER CLUTCH CYLINDER Peugeot 208 · PARTS GUIDE

Peugeot 208 Master Clutch Cylinder: Specs, Fitment & Common Faults

Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.

Peugeot 208 (2012-2019) clutch master cylinder in the clutch hydraulic circuit, genuine number to confirm via VIN Illustration for editorial purposes
Find Peugeot 208 Master Clutch Cylinder Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident Peugeot 208 master clutch cylinder part number at the time of writing. Please confirm the correct part via a Peugeot dealer or parts specialist using your VIN.

Why the 208's clutch gets blamed for a hydraulic leak

On the Peugeot 208, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.

Peugeot 208 Master Clutch Cylinder reference plate
Pedal on the floor? Look lower down first

Carwiki's guide to the 208 says a pedal that stays on the floor usually points to the slave cylinder. That's a useful starting point, but not a rule. Check the reservoir level first. If it's dropped and there's fluid under the gearbox, the slave is leaking. If the level is steady, nothing is dripping, and the pedal still sinks when held down, the master cylinder is letting fluid bypass its seals inside.

Shared fluid

On the 208 the clutch takes its fluid from the brake reservoir. Schaeffler warns that old or contaminated fluid swells the rubber seals in clutch hydraulics, so a flush is better than a top-up when a new cylinder goes in.

Typical cost

ClickMechanic's average Peugeot master cylinder replacement is about £259. The master on most small Peugeots sits high on the bulkhead behind the pedal, so allow one to three hours of labour.

Before you buy: part numbers and fitment listed below are a general guide only. Always confirm compatibility using your vehicle's VIN, or check with a Peugeot parts specialist, since specifications can vary by trim, model year and market.
What it does

On the Peugeot 208, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.

Part numbers
OEM referenceVaries by engine/transmission — confirm via VIN
Common aftermarket brandsSachs, LUK, Febi Bilstein, ATP

Fitment checks that save a wasted order on the 208

This part is not necessarily interchangeable across every 208 generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Peugeot 208 from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Peugeot 208 Master Clutch Cylinder Here!

Opens live listings in a new tab.

Leaks, a spongy pedal and how hard the job is

These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.