Renault Captur Headlights: Specs, Fitment & Common Faults
Bulb type, unit part numbers, and the faults that actually cause that flickering or dim light you've noticed.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: LH Hella 1EX 012 977-611 / RH Hella 1EX 012 977-661
| Passenger side (LH / nearside) headlight — aftermarket | Magneti Marelli 711307024450 (halogen H1/H1, no stated DRL, levelling not stated, OE-quality); Magneti Marelli 711307024448 (halogen H1/H1, OE-quality); Abakus 551-1199LMLEMN2 (halogen H1, electric levelling motor); Prasco RN7004924 (halogen H1/H1, electric levelling motor); TYC 20-17528-16-2 (LED, with DRL, electric levelling); Hella 1EX 012 977-611 (LED, with DRL, without control unit) |
|---|---|
| Driver's side (RH / offside) headlight — aftermarket | Magneti Marelli 711307024451 (halogen H1/H1, OE-quality); Magneti Marelli 711307024449 (halogen H1/H1, OE-quality); Abakus 551-1199RMLDEM2 (halogen H11, electric levelling motor); Prasco RN7004923 (halogen H1/H1, electric levelling motor); TYC 20-17527-16-2 (LED, with DRL, electric levelling); Hella 1EX 012 977-661 (LED, with DRL, without control unit) |
| Bulb types | dipped/main H1 (some units H11), indicator PY21W, sidelight W5W, P21W; LED units have no replaceable main bulbs |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine units against your VIN |
| Fitment notes | Halogen H1 units are the base fit and LED units (Hella, TYC, Magneti Marelli 714000028860/714000028861, Van Wezel) suit the LED-headlight trims; Hella LED units are supplied without control unit and need professional fitting. |
What the MOT manual says about LED swaps on the Captur
If your Captur has factory-fitted halogen headlamp housings, converting them to fit LED bulbs is treated as a definite MOT failure under the current inspection manual — this isn't a grey area or a minor advisory, since a housing designed for halogen doesn't distribute an LED bulb's light output correctly, which can dazzle oncoming drivers. If you want a genuine LED upgrade, the correct route is a complete headlight unit designed for LED from the factory, not a bulb swap into an existing halogen housing.
Dipped beam bulb steps
What each front lamp unit does
The Renault Captur's headlight unit houses the main and dipped beam bulbs (or LED/matrix modules on higher trims), positioned and angled to illuminate the road ahead without excessively dazzling oncoming traffic. Many modern units also integrate the daytime running light and front indicator into the same housing, which affects both the part number and the complexity of any repair.
Matching the right lamp unit
| Standard trims | Halogen as standard, with "Pure Vision" full LED headlights available further up the range on more recent generations |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Headlights Guide for the four bulb technologies and how they differ, UK law on aim and modifications, common faults to check for, how difficult this job is to DIY, and confirming fitment against your VIN.
The same part on other modelsThe same part, covered across other Renault models.