Car Parts Guide
MASTER CLUTCH CYLINDER Renault Clio · PARTS GUIDE

Renault Clio Master Clutch Cylinder: Specs, Fitment & Common Faults

Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.

Renault Clio (MK4 2012-2019) clutch master cylinder in the clutch hydraulic circuit, genuine number to confirm via VIN Illustration for editorial purposes
Find Renault Clio Master Clutch Cylinder Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident Renault Clio master clutch cylinder part number at the time of writing. Please confirm the correct part via a Renault dealer or parts specialist using your VIN.

A sinking pedal on the Clio: the part to suspect before the clutch

On the Renault Clio, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.

Renault Clio Master Clutch Cylinder reference plate
Part of a shared Renault-Nissan system

The Clio uses the same family of concentric slave cylinders as the Modus, Kangoo, Micra and Note (see our Clio slave cylinder page). On these cars the slave sits inside the bell housing, which makes the master cylinder the part to rule out before anyone quotes for gearbox removal.

How to check

With the engine off, press the pedal and hold it down. A pedal that sinks slowly with no fluid loss points to the master cylinder's internal seals. A pedal that sinks and a reservoir level that keeps dropping points to a leak, and if there's nothing wet behind the pedal, the leak is likely at the gearbox end.

Whocanfixmycar adds one more sign: a fluid level in the reservoir that rises and falls with the pedal.

Typical cost

ClickMechanic's average Renault master cylinder job is about £277. After fitting, the system must be bled at the slave's quick-release connector, by hand rather than with a pressure bleeder.

Before you buy: part numbers and fitment listed below are a general guide only. Always confirm compatibility using your vehicle's VIN, or check with a Renault parts specialist, since specifications can vary by trim, model year and market.
What it does

On the Renault Clio, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.

Part numbers
OEM referenceVaries by engine/transmission — confirm via VIN
Common aftermarket brandsSachs, LUK, Febi Bilstein, ATP

Matching the right pedal-end cylinder to the Clio

This part is not necessarily interchangeable across every Clio generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Renault Clio from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Renault Clio Master Clutch Cylinder Here!

Opens live listings in a new tab.

Signs of wear, the fitting job and brands worth buying

These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.