Car Parts Guide
REAR BUMPER Seat Arona · PARTS GUIDE

Seat Arona Rear Bumper: Fitment, Sensors & Common Damage

On the Arona, a case on a related model saw reverse camera, lights, and sensors all fail together — traced to wiring cut inside the tailgate hinge from repeated flexing.

Seat Arona (2017 ON) rear bumper, primed cover, aftermarket Van Wezel 4906544 Illustration for editorial purposes
Find Seat Arona Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Van Wezel 4906544 / Diederichs 7455056

Accuracy note: Covers the Seat Arona (2017-) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Van Wezel 4906544 (Rear, primed); Diederichs 7455056 (Rear, primed, for vehicles with parking sensors); Diederichs 7455055 (Rear, for vehicles without parking sensors, primed); Blic 5506-00-6624950Q (Rear); Blic 5506-00-6624950P (Rear)
Lower sections, corners & trimsPrasco ST7501051 (Rear, Section: Upper section, primed)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Camera, reverse lights and sensors out together on the Arona

A documented pattern worth knowing if your reverse camera, reversing lights, and parking sensors all stop working together (rather than one at a time): this combination points strongly toward a wiring fault at the tailgate hinge itself, where the flexible loom section flexes every single time the boot opens and closes. Over years of use, wires inside this section can fatigue and cut, and because all three functions often share wiring routed through this same flex point, they can fail together in a way that looks like a major electrical fault but actually traces back to this one specific, repairable spot. Opening the tailgate and inspecting the rubber wiring conduit near the hinges for a visible cut or fray is worth doing before assuming a more serious fault.

A fixed swan-neck towbar can sometimes be picked up by the rear parking sensors as a false obstruction, particularly if the plastic protective cap over the ball has become knocked slightly askew — a detachable towbar avoids this issue entirely, since it's removed when not actively towing. If you're weighing up the two options and rear sensor false triggers are a concern, a detachable towbar is the safer choice for this reason.

Towbar wiring, sensors and the Arona's back panel

Kerb damage to the Seat Arona's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.

Watch: replacing it

🎬 Watch: Seat Ibiza 6F Rear Bumper Removal/Replacement How To (2017-2021) (sister (seat ibiza 6f))

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Seat Arona Rear Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Crash absorbers, reinforcement and the Arona's back panel

Beyond absorbing minor impacts, the rear bumper on higher trims of the Arona often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations, Derivatives and Colour
Standard trimsDark Camouflage, Asphalt Blue, Sapphire Blue, plus a choice of three contrast roof colours (Midnight Black, Magnetic Tech, Candy White)
FR/Style trimCandy White is restricted to fleet orders only, the same pattern as the Ibiza — not available to retail customers; the rear bumper is also styled differently on this trim
Find Seat Arona Rear Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Seat models.