Car Parts Guide
REAR BUMPER Skoda Fabia · PARTS GUIDE

Skoda Fabia Rear Bumper: Fitment, Sensors & Common Damage

If your Fabia has a towbar and parking sensors keep false-triggering, a fix — a rubber towball cover — resolves this for many owners.

Skoda Fabia (MK3 2014-2021) rear bumper, aftermarket Prasco SK3281051 Illustration for editorial purposes
Find Skoda Fabia Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco SK3281051 / Van Wezel 7629540

Accuracy note: Covers the Skoda Fabia (Mk3 2014-2021) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Prasco SK3281051 (Rear, Colour: black); Prasco SK3301061 (Rear, Colour: grey, for vehicles with park assist, Smooth); Van Wezel 7629540 (Rear, Colour: black, for vehicles with parking sensors, for vehicles without parking sensors); Van Wezel 7632540 (Rear, for vehicles with parking sensors, for vehicles without parking sensors, for facelift); Van Wezel 7632541 (Rear, with holes for parking sensors); Van Wezel 7629541 (Rear, Smooth, with holes for parking sensors, with holes for exhaust pipe)
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Stopping phantom beeps after a towbar on the Fabia

If you've had a towbar fitted and the parking sensors now trigger falsely — beeping when nothing is close — it's worth trying a fix before assuming a wiring fault: a rubber, golf-ball-style cover fitted over the towball itself. One owner spent time investigating theories about the sensors detecting the towball's shape or position, before discovering that simply covering it with a rubber ball cover resolved the false triggering completely.

A point on towbar wiring generally: always use a proper factory-specification trailer module rather than a basic wiring splice — a correctly installed module automatically disables the parking sensors and adjusts fog light logic when a trailer is connected, while a bypass or spliced connection typically doesn't, forcing you to manually disable sensors every time you reverse with a trailer attached.

Low-speed knocks and hidden damage

The Skoda Fabia's rear bumper is rarely just a bumper — parking sensors, a reversing camera housing, and sometimes exhaust trim finishers are commonly built into it, so even minor kerb damage can turn a simple swap into a bigger job.

Watch: replacing it

🎬 Watch: Skoda Fabia NJ Stoßstange hinten demontieren (non-English)

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Skoda Fabia Rear Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

What sits behind the paint

Beyond absorbing minor impacts, the rear bumper on higher trims of the Fabia often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations, Derivatives and Colour
Mk1 (1999–2007), standard trimsCandy White, Brilliant Silver, Cappuccino Beige, Flash Red
Mk1 vRS SE (2007, UK-only, 1,000 units)A genuine UK-exclusive special edition finished in "Race Blue" metallic, individually numbered
Mk3/Mk4 (2015–present), standard trimsCandy White, Moon White, Brilliant Silver, Race Blue, Velvet Red
Monte Carlo trimPhoenix Orange replaces Black Magic on this trim; all colours pair with a two-tone Black Magic contrast roof as standard — different bumper styling with black accents than standard trim
Find Skoda Fabia Rear Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Skoda models.