Car Parts Guide
CLUTCH KIT Skoda Octavia · PARTS GUIDE

Skoda Octavia Clutch Kit: Specs, Fitment & Common Faults

The warning signs of a wearing clutch, and what actually fits your specific engine and gearbox.

Skoda Octavia (MK3 2013-2020) clutch kit, 240mm Illustration for editorial purposes
Find Skoda Octavia Clutch Kit Here!

Opens live listings in a new tab.

Skoda Octavia Clutch Kit reference plate

OEM Part Number: confirm via VIN

Accuracy note: confirmed directly from Skoda's own parts catalogue — genuine references differ significantly by generation and engine, so confirm your exact spec before ordering.
1Z generation (Mk2, TDI and TDI RS), clutch kit with lightweight flywheelGenuine reference: 03G 105 264 P — 240mm diameter, 23 teeth
Octavia 2, 2.0TDI (100kW/103kW/125kW) dual-mass flywheel with clutch, 4-piece setGenuine reference: 229 060 100 9 — 240mm diameter, shared with Superb 2 and Yeti
Octavia 3, dual-mass flywheel (1.6TDI/2.0TDI), 6-speed manualGenuine reference: 03L 105 266 BT — 240mm clutch, shared with Yeti
Octavia 3/4, single-mass flywheel (2.0TDI CR 103-140kW)Genuine reference: 03L 105 266 EF — shared across Karoq, Octavia 2/3, Superb 2/3, Yeti

Hill starts, traffic and the Octavia's friction plate

On the Skoda Octavia, unlike parts that fail on a predictable mileage schedule, clutch wear varies enormously based on driving style — a clutch that's ridden gently in easy traffic can outlast one used hard for towing or aggressive launches by a huge margin.

Don't ignore a change in pedal feel

An Autobiz case study describes a 2012 Octavia 2.0 TDI where the clutch felt different for a while, then crunched and grated on gear changes, then made a scraping noise and stopped releasing. The pressure plate's diaphragm spring had cracked, and the loose piece wore through the soft aluminium gearbox casing. The gearbox was scrapped, and the owner bought a second-hand one because an exchange unit carried a big damage surcharge. Acting when the pedal first felt wrong would have meant a clutch kit, not a gearbox.

Labour and the flywheel

A LuK Clutch Academy guide gives a book time of about five hours for the Octavia 2.0 TDI. It says to test the dual-mass flywheel for heat stress, grease loss and play between its two halves, rather than replace it by default. Have the locking wheel bolt key ready, because both driveshafts come out.

The UK average for a clutch replacement is about £670 (whocanfixmycar figures quoted by the RAC). Skoda shares parts with VW, where the average is about £679.

Before you buy: clutch specification varies by engine size and torque output — a kit rated for a smaller engine won't necessarily cope with a more powerful version. Always confirm against your VIN before ordering.

How the friction plate, pressure plate and bearing work together on the Octavia

The clutch kit — typically comprising the clutch plate, pressure plate and release bearing — manages the connection between the engine and gearbox on manual versions of the Octavia, allowing smooth engagement and disengagement when changing gear. Higher-torque engine variants use a heavier-duty kit rated to handle the extra load without premature wear.

Find Skoda Octavia Clutch Kit Here!

Opens live listings in a new tab.

A slipping drive, a gearbox-out job and the brands worth fitting

These are the same regardless of make or model — see our full Clutch Kit Guide for symptoms of wear, confirming fitment against your VIN, and aftermarket advice.