Car Parts Guide
SLAVE CLUTCH CYLINDER Skoda Octavia · PARTS GUIDE

Skoda Octavia Slave Clutch Cylinder: Specs, Fitment & Common Faults

The other half of the hydraulic clutch system, and the faults that get mistaken for a failing master cylinder.

Skoda Octavia (MK3 2013-2020) clutch slave cylinder, OEM 5Q0 721 261 N Illustration for editorial purposes
Find Skoda Octavia Slave Clutch Cylinder Here!

Opens live listings in a new tab.

Skoda Octavia Slave Clutch Cylinder reference plate

OEM Part Number: 5Q0 721 261 N

Accuracy note: confirmed below via Skoda's genuine parts catalogue, split by gearbox code rather than model year — check which manual gearbox your Octavia has (marked on the transmission casing or in your handbook) before ordering.
MQ200 gearbox (manual, most common)Skoda OEM: 5Q0 721 261 N
MQ250 gearbox (manual, higher-torque)Skoda OEM: 5Q0 721 261 M / 1K0 721 261 AK

How to tell which half of the Octavia's clutch hydraulics has failed

On the Skoda Octavia, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal, a clutch that won't disengage properly — which means diagnosing which one has actually failed usually needs a proper inspection rather than guesswork.

Internal or external depends on the gearbox

Briskoda members discussing a 2007 Octavia vRS pointed out that on this generation the 6-speed gearbox has an internal slave cylinder and the 5-speed has an external one. On later cars the MQ200 and MQ250 gearboxes use different parts (see the table above). Count the gears on the lever before ordering.

In that thread, a new slave cylinder costing about €200 didn't fix the clutch fault. If yours is a 6-speed, getting the diagnosis right matters, because the gearbox has to come out to reach the slave.

Shared fluid

The Octavia's clutch draws from the brake reservoir. Schaeffler warns that old or wrong fluid swells the seals in a concentric slave, so a brake fluid change at the set interval helps the clutch as well.

Typical cost

An external slave averages about £125 (ClickMechanic). An internal one costs close to a full clutch job, and the average VW Group clutch replacement is about £679 (whocanfixmycar figures quoted by the RAC).

Before you buy: some versions of the Octavia use an internal slave cylinder built into the gearbox, others use an external unit — these are not interchangeable. Always confirm against your VIN before ordering.
What it does

The slave cylinder receives hydraulic pressure from the master cylinder and uses it to physically push the clutch release mechanism, disengaging the clutch when the pedal is pressed. On many modern cars including several versions of the Octavia, this is built inside the transmission housing as a "concentric slave cylinder," which changes both the part itself and the labour involved in replacing it.

Which versions of the Octavia share the same release cylinder

Whether the Octavia uses an internal (concentric) or external slave cylinder depends on the specific generation and transmission — these two designs are not interchangeable, and use entirely different part numbers and replacement procedures. Always confirm which type your specific car uses before ordering. Whether you're sourcing a replacement slave clutch cylinder for your Skoda Octavia from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Skoda Octavia Slave Clutch Cylinder Here!

Opens live listings in a new tab.

Symptoms, how hard the job is, and brands worth fitting

These are the same regardless of make or model — see our full Slave Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.