Car Parts Guide
ENGINE MOUNT Suzuki Ignis · PARTS GUIDE

Suzuki Ignis Engine Mount: Specs, Fitment & Common Faults

On the Ignis, some aftermarket mounts are made from a harder material than OEM, documented causing new vibration at idle that wasn't there before.

Suzuki Ignis (2017 ON) engine mount positions Illustration for editorial purposes
Find Suzuki Ignis Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

No aftermarket reference verified for this generation

Accuracy note: Covers the Suzuki Ignis (2017-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine mounts (aftermarket)No reliable aftermarket reference found for this generation — order against your VIN
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

What the mountings soak up on the Ignis

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Ignis use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: The Best Modification you can do to your Suzuki Ignis Sport - Upgraded Engine Mounts

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the mount positions and fixings can differ slightly.

Suzuki Ignis Engine Mount reference plate
Find Suzuki Ignis Engine Mount Here!

Opens live listings in a new tab.

Harder aftermarket mountings and more vibration

Before choosing a replacement mount, some aftermarket options are made from a harder material than the original equipment part, and this has been documented causing new vibration at idle that wasn't present before, even when correctly fitted. If you've had mounts replaced and now have vibration that wasn't there previously, it's worth asking whether OEM or OEM-equivalent mounts were used.

On related Suzuki models, the right-hand upper engine mount has been documented failing more often than the other mounts, since it bears considerably more stress during acceleration — a loud clunk at take-off is the characteristic symptom of this particular mount failing.

That Suzuki's smaller three-cylinder engines naturally have somewhat more inherent vibration than a four-cylinder equivalent, simply due to the physics of cylinder balance — worth keeping this baseline in mind when judging whether vibration is excessive.

Signs of a worn mounting on the Ignis and how to replace it

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Suzuki models.