Suzuki Ignis Tail Lights: Specs, Fitment & Common Faults
On the Ignis, a rear light on a related model was found completely full of water with no visible damage at all — worth checking for proactively.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket rear lamps: TYC 11-14536-05-2 / Diederichs 6436091
| Tail lights (aftermarket) | TYC 11-14536-05-2 (left, LED, outer section); Diederichs 6436091 (left, with bulb holder); Diederichs 6436093 (left, LED, with bulb holder) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine light varies by trim, bulb or LED type and facelift date, so order it against your VIN |
| Fitment notes | Left and right are separate parts; check LED or bulb type, whether the bulb holder is included, body style and facelift date before ordering. |
What sits behind the rear lamp units of the Ignis
One housing, several jobs: on the Suzuki Ignis, brake light, indicator, reversing light and rear fog light are typically all bundled into a single tail light unit, which is why one electrical fault can take out multiple functions together, and "faulty tail light" covers a lot of possible causes.
Being seen from behind
Beyond basic rear visibility, tail light units on the Ignis typically integrate brake lights, indicators, reversing lights and rear fog lights into a single housing. Higher trims may use LED units with a distinct light signature, which are not interchangeable with standard halogen units even if the physical mounting looks similar.
Watch: replacing itThis video shows a closely related car on the same platform, so the light fittings and clips can differ slightly on yours.
| Standard trims | Halogen bulb-based units as standard |
|---|---|
| Higher trims, later model years | LED tail lights become available further up the range, a different assembly and connector from the halogen units on lower trims |
Tail light design changed between generations of the Ignis, and facelifted versions within the same generation often use a revised light signature that isn't interchangeable with pre-facelift units. Always confirm the exact part for your specific model year before ordering. Whether you're sourcing a replacement tail lights for your Suzuki Ignis from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.
Opens live listings in a new tab.
A distinctive rear lamp case on a related Suzuki
This is worth checking for proactively: one case on a related Suzuki model found a rear light completely full of water, only noticed because of water audibly sloshing about when the car moved, with no visible damage to the unit at all — leading the owner to suspect a possible design fault rather than impact damage. It's worth periodically checking for water pooling inside your own rear lights even without obvious symptoms.
There's no significant visible difference between air conditioning condensation and rainwater once pooling inside the car, so checking whether the air conditioning condensation drain is open and clear is an easy thing to rule out first.
Common faults, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Tail Lights Guide for diagnosing which circuit has failed, how easy this job is to DIY, and aftermarket advice.
The same part on other modelsThe same part, covered across other Suzuki models.