Car Parts Guide
MASTER CLUTCH CYLINDER Suzuki Swift · PARTS GUIDE

Suzuki Swift Master Clutch Cylinder: Specs, Fitment & Common Faults

Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.

Suzuki Swift (2017 ON) clutch master cylinder in the clutch hydraulic circuit, genuine number to confirm via VIN Illustration for editorial purposes
Find Suzuki Swift Master Clutch Cylinder Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident Suzuki Swift master clutch cylinder part number at the time of writing. Please confirm the correct part via a Suzuki dealer or parts specialist using your VIN.

Before paying for a new clutch on the Swift, check this

On the Suzuki Swift, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.

Suzuki Swift Master Clutch Cylinder reference plate
Air first, parts second

A Swift Sport owner on the Swift Sport Owners Club found gear changes very hard once the car was warm, after a new clutch had gone in. Forum members said warm clutch fluid expands and makes any trapped air worse, so the system should be bled before anything is replaced, and the slave cylinder suspected after that. The same logic helps on any Swift with a soft or long-travel pedal: bleeding costs little and rules out the simplest cause.

If it isn't air

Once the system has been bled properly, a pedal that sinks while held, fluid on the bulkhead, or a reservoir level that moves with the pedal all point at the master. Schaeffler warns that fast or pressure bleeding can overstroke the slave cylinder, so ask for it to be done by hand.

Typical cost

ClickMechanic puts the UK average for a master cylinder job at about £200, with a range of roughly £140 to £275.

Before you buy: part numbers and fitment listed below are a general guide only. Always confirm compatibility using your vehicle's VIN, or check with a Suzuki parts specialist, since specifications can vary by trim, model year and market.
What it does

On the Suzuki Swift, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.

Part numbers
OEM referenceVaries by engine/transmission — confirm via VIN
Common aftermarket brandsSachs, LUK, Febi Bilstein, ATP

Checking compatibility before ordering for the Swift

This part is not necessarily interchangeable across every Swift generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Suzuki Swift from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Suzuki Swift Master Clutch Cylinder Here!

Opens live listings in a new tab.

When the pedal end fails, and what to replace it with

These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.