Vauxhall Corsa Clutch Kit: Specs, Fitment & Common Faults
The warning signs of a wearing clutch, and what actually fits your specific engine and gearbox.
Opens live listings in a new tab.
OEM Part Number: 5616019
| Corsa D VXR (Z16LER/A16LER), standard, genuine Sachs reference | Dual-mass flywheel: 5616019 / 55556925 |
|---|---|
| Corsa D VXR Nürburgring/Clubsport specifically | A different Sachs kit — will not fit a standard VXR and vice versa |
| Corsa D/Astra H shared petrol engines, dual-mass flywheel kit | LuK reference: 600023700 — 240mm diameter, with automatic adjustment, 8 DMF mounting bores |
| 1.3 CDTI diesel, single-mass flywheel kit | A different flywheel type from the petrol variants — shared with Combo C and Meriva |
Why two of the same Corsa can need a new clutch years apart
On the Vauxhall Corsa, unlike parts that fail on a predictable mileage schedule, clutch wear varies enormously based on driving style — a clutch that's ridden gently in easy traffic can outlast one used hard for towing or aggressive launches by a huge margin.
Small details that stop the new clutch fittingA Schaeffler guide for the Meriva, which is built on the Corsa's platform, covers the issues on this family's clutch jobs. Prising the old clutch cover off can damage a flywheel dowel, and then the new cover won't sit properly. Fit the old clutch back on to test the dowels if the new one won't go. The concentric slave cylinder should be replaced every time, and the new one must never be compressed before fitting or it can leak. Fix any oil leak at the back of the engine first, and keep grease on the splines to a thin smear.
The VXR dual-mass flywheelThe Corsa D VXR uses a dual-mass flywheel, and the Nürburgring and Clubsport editions need a different kit from the standard car (see above). LuK's own guidance warns that many dual-mass flywheels returned for noise turn out to be serviceable, and the noise comes from elsewhere. Have it measured before agreeing to replace it.
The average Vauxhall clutch replacement comes to about £722 (whocanfixmycar figures quoted by the RAC).
Inside the bell housing of the Corsa
The clutch kit — typically comprising the clutch plate, pressure plate and release bearing — manages the connection between the engine and gearbox on manual versions of the Corsa, allowing smooth engagement and disengagement when changing gear. Higher-torque engine variants use a heavier-duty kit rated to handle the extra load without premature wear.
Opens live listings in a new tab.
Slipping, judder and a high biting point: the warning signs
These are the same regardless of make or model — see our full Clutch Kit Guide for symptoms of wear, confirming fitment against your VIN, and aftermarket advice.