Car Parts Guide
MASTER CLUTCH CYLINDER Vauxhall Corsa · PARTS GUIDE

Vauxhall Corsa Master Clutch Cylinder: Specs, Fitment & Common Faults

Everything — check this before you buy — part numbers, which generations it fits, and the warning signs that it's on its way out.

Vauxhall Corsa (2014-2019) clutch master cylinder in the clutch hydraulic circuit, genuine number to confirm via VIN Illustration for editorial purposes
Find Vauxhall Corsa Master Clutch Cylinder Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident Vauxhall Corsa master clutch cylinder part number at the time of writing. Please confirm the correct part via a Vauxhall dealer or parts specialist using your VIN.

Why a cheap hydraulic part gets mistaken for clutch failure on the Corsa

On the Vauxhall Corsa, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal or one that sinks to the floor could be either component. Plenty of owners end up paying for the wrong part first, since there's no way to tell them apart without inspecting the system directly.

Vauxhall Corsa Master Clutch Cylinder reference plate
Fit the slave correctly, or the master gets the blame

Most manual Corsas use a concentric slave cylinder inside the bell housing. Schaeffler's guide to the Meriva, which shares the Corsa's platform, says the new slave must never be compressed before fitting or it can leak. When that happens after a clutch job, the pedal goes soft, and the master cylinder is often replaced next by mistake. If your pedal changed soon after a new clutch, ask whether the slave was fitted to the instructions.

Signs that do point to the master

A pedal that sinks slowly when held at a standstill, with no fluid lost, is the clearest sign. Fluid weeping onto the bulkhead under the dashboard is another. Whocanfixmycar also lists a reservoir level that rises and falls as the pedal moves.

Typical cost

ClickMechanic's average Vauxhall master cylinder job is about £315, against a UK average of around £200.

Before you buy: part numbers and fitment listed below are a general guide only. Always confirm compatibility using your vehicle's VIN, or check with a Vauxhall parts specialist, since specifications can vary by trim, model year and market.
What it does

On the Vauxhall Corsa, the master clutch cylinder converts the pressure from your foot on the clutch pedal into hydraulic force, pushing fluid through a line to the slave cylinder, which in turn disengages the clutch. When it works properly, you don't think about it at all — which is usually a sign it's doing its job.

Part numbers
OEM referenceVaries by engine/transmission — confirm via VIN
Common aftermarket brandsSachs, LUK, Febi Bilstein, ATP

Which versions of the Corsa share the same cylinder

This part is not necessarily interchangeable across every Corsa generation or engine — hydraulic clutch systems and bore sizes can differ between petrol and diesel variants, and between manual gearbox revisions. Cross-check the exact part number against your specific vehicle before ordering; a cylinder that looks identical can still be the wrong fit. Whether you're sourcing a replacement master clutch cylinder for your Vauxhall Corsa from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Vauxhall Corsa Master Clutch Cylinder Here!

Opens live listings in a new tab.

Common failures and a sensible replacement

These are the same regardless of make or model — see our full Master Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.