Car Parts Guide
SLAVE CLUTCH CYLINDER Vauxhall Corsa · PARTS GUIDE

Vauxhall Corsa Slave Clutch Cylinder: Specs, Fitment & Common Faults

The other half of the hydraulic clutch system, and the faults that get mistaken for a failing master cylinder.

Vauxhall Corsa (2014-2019) clutch slave cylinder, confirm number via VIN Illustration for editorial purposes
Find Vauxhall Corsa Slave Clutch Cylinder Here!

Opens live listings in a new tab.

Vauxhall Corsa Slave Clutch Cylinder reference plate

OEM Part Number: confirm via VIN

Accuracy note: we weren't able to verify a confident Vauxhall Corsa slave clutch cylinder part number at the time of writing. Please confirm the correct part via a Vauxhall dealer or parts specialist using your VIN.

Gearbox end or pedal end: telling the two cylinders apart on the Corsa

On the Vauxhall Corsa, the master and slave clutch cylinders work as a pair, and symptoms of failure look almost identical from the driver's seat — a soft pedal, a clutch that won't disengage properly — which means diagnosing which one has actually failed usually needs a proper inspection rather than guesswork.

Never compress a new one

Schaeffler's clutch guide for the Meriva, which shares the Corsa's platform, says the concentric slave cylinder should be replaced every time the clutch is, and that the new one must never be compressed before fitting. Pushing the piston in by hand can damage the seal, and it may leak soon after. If your pedal went soft within weeks of a new clutch, this is one of the first things to ask about.

Other causes of early failure

Schaeffler's wider guide to slave cylinder failures adds contaminated or wrong fluid, a clutch plate fitted the wrong way round, and overstroking from fast or pressure bleeding. The Corsa's clutch shares the brake fluid reservoir, so fresh fluid of the right grade matters for both systems.

Typical cost

The slave sits inside the bell housing, so on its own it costs about the same in labour as a clutch. The average Vauxhall clutch replacement is about £722 (whocanfixmycar figures quoted by the RAC).

Before you buy: some versions of the Corsa use an internal slave cylinder built into the gearbox, others use an external unit — these are not interchangeable. Always confirm against your VIN before ordering.
What it does

The slave cylinder receives hydraulic pressure from the master cylinder and uses it to physically push the clutch release mechanism, disengaging the clutch when the pedal is pressed. On many modern cars including several versions of the Corsa, this is built inside the transmission housing as a "concentric slave cylinder," which changes both the part itself and the labour involved in replacing it.

Fitment checks that avoid a wasted gearbox job

Whether the Corsa uses an internal (concentric) or external slave cylinder depends on the specific generation and transmission — these two designs are not interchangeable, and use entirely different part numbers and replacement procedures. Always confirm which type your specific car uses before ordering. Whether you're sourcing a replacement slave clutch cylinder for your Vauxhall Corsa from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.

Find Vauxhall Corsa Slave Clutch Cylinder Here!

Opens live listings in a new tab.

What failure feels like, and when it means a gearbox-out job

These are the same regardless of make or model — see our full Slave Clutch Cylinder Guide for symptoms of failure, how difficult this job is to DIY, and aftermarket advice.