Car Parts Guide
REAR BUMPER Volvo V60 · PARTS GUIDE

Volvo V60 Rear Bumper: Fitment, Sensors & Common Damage

On the V60, towbar wiring plugs on related models have been cunningly camouflaged inside a padded foam pocket rather than being visible connectors.

Volvo V60 (2010-2018) rear bumper, primed cover, aftermarket Prasco VV5181071 Illustration for editorial purposes
Find Volvo V60 Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco VV5181071 / Van Wezel 5935544

Accuracy note: Covers the Volvo V60 (2010-2018) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Prasco VV5181071 (Rear, primed); Van Wezel 5935544 (Rear, Colour: black, primed, Smooth, with holes for towing hook, for facelift); Diederichs 7662655 (Rear, primed); Blic 5506-00-9023950P (Rear); Blic 5506-00-9023951P (Rear, with holes for parking sensors); Klokkerholm 9022950 (Rear)
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

The parts hiding behind the V60's rear cover

The Volvo V60's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

How the V60's tail absorbs a low-speed knock

Beyond absorbing minor impacts, the rear bumper on higher trims of the V60 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Watch: replacing it

🎬 Watch: Volvo S60 rear bumper removal change parking sensors (sister (volvo s60 p3 2010-2018))

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Volvo V60 Rear Bumper reference plate
Generations and Colour
Standard trimsCrystal White, Onyx Black, Denim Blue, Fusion Red
Polestar special edition (2014)Initially launched with only two colour choices — black metallic or "Rebel Blue" — before white and silver metallics were added later; genuine limited-run performance model with unique Öhlins suspension and Brembo brakes
Find Volvo V60 Rear Bumper Here!

Opens live listings in a new tab.

Finding the towbar plugs on the V60

If you're fitting a towbar yourself, documented cases on related Volvo models describe towbar wiring plugs being cunningly camouflaged inside a padded foam pocket taped to the back of the main wiring loom, rather than being visible, exposed connectors.

It's worth using a Volvo-specific electrics kit and dedicated trailer module rather than a generic universal wiring type, since genuine kits require dealer software to properly integrate with the car's safety systems.

Also, a flat area with a small dimple above the number plate on related models acts as a factory drilling guide for a reversing camera retrofit.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Volvo models.