Volkswagen Up! Engine Mount: Specs, Fitment & Common Faults
A test on the Up! tells apart a worn engine mount from an expensive DSG fault — worth trying before assuming the transmission is at fault.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket mountings: Febi 101058 / Vaico V10-9534
| Engine Mount — Right (aftermarket) | Maxgear 40-0582, Febi 101058 |
|---|---|
| Engine Mount — Lower (aftermarket) | Original Imperium 610021, Febi 175425 |
| Engine Mount — Rear (aftermarket) | Vaico V10-9534, Sasic 2700167 |
| Genuine (OE) number | Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN |
| Fitment notes | The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount. |
Worn mounting or DSG fault? A test to tell them apart
If you're hearing a clunk or jolt on DSG-equipped models, particularly on gear changes or when shifting between drive and reverse, it's worth confirming whether this is a worn engine mount (the "dogbone" torque mount, cheap to replace) before assuming a much more expensive DSG mechatronics fault. A simple, well-corroborated self-test: on level ground, come to a complete stop, then switch from drive into reverse (or vice versa) and pull away gently. A pronounced clunk or jolt at this moment of engaging the opposite direction points strongly toward a worn torque mount rather than the gearbox itself — the engine has slightly more room to rock against a worn mount before the drivetrain engages smoothly in the new direction.
This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.
Hydraulic and rubber mountings on the Up!
Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Up! use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.
Opens live listings in a new tab.
Signs of a worn mounting on the Up! and how to replace it
These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.
The same part on other modelsThe same part, covered across other Volkswagen models.