Audi A4 Rear Springs: Specs, Fitment & Common Faults
Confirmed directly in VW Group's own workshop documentation: the rear spring is a separate, distinct assembly from the shock absorber, even on the simpler torsion beam axle.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket coils: Monroe SP5198 / Sachs 994374
| Rear coil springs (aftermarket) | Monroe SP5198 (standard, 384 mm); Monroe SP3925 (standard); Sachs 994374 (standard, 378 mm); Sachs 994382 (sport, 323 mm) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN |
| Torsion beam axle, standard rate | Confirm the colour-code marking on your existing spring before ordering — VW Group uses this to distinguish rate variants within the same axle type |
| Multi-link axle (higher-output/4Motion variants) | A different spring and spring seat design from the torsion beam version, reflecting the different axle architecture |
| Estate/higher-load body style, where applicable | a stiffer rear spring rate than the equivalent standard body style, to handle the increased load-carrying capacity |
It's worth doing the Audi A4's rear springs as a pair rather than one at a time — mixing a new spring with an old, sagged one on the opposite side throws off ride height evenly and skews handling.
Ordering coils for the A4: separate from the shocks
Worth knowing on the Audi A4: VW Group's own workshop manuals list the rear spring as a distinct removal and installation step from the shock absorber, with its own upper and lower spring seats — even on the simpler torsion beam rear axle. This means a spring can fail (sag, crack, or corrode through) independently of the shock absorber, and vice versa, so it's worth diagnosing which has actually failed before assuming both need replacing together.
Why spring breakage is common on cars like the A4
It's a slow decline followed by a sudden failure with the Audi A4's rear springs — a gradually lower ride height for months, then an abrupt break at the coil's end announced by a clunk. One rear corner sitting visibly lower than the other is the sign to watch for.
Why the A4's coils matter for handling and braking
The Audi A4's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber (which controls the spring's rate of compression and rebound) rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Audi models.