Car Parts Guide
RADIATOR BMW 1 Series (2019– F40) · PARTS GUIDE

BMW 1 Series Radiator: Specs, Fitment & Common Faults

On the 1 Series, the water pump is often the first cooling component to fail on related models, typically costing £300-£500 to replace.

Generation covered: this guide is for the third-generation 1 Series (F40, 2019–present), with particular focus on 2019–2023 registered examples now old enough for parts to be a common search. Check your logbook or VIN if you're unsure which generation you have.
BMW 1 Series (F40 2019 ON) radiator, core 195 x 202 mm, OEM 17118586324, aftermarket Nissens 60862 Illustration for editorial purposes
Find BMW 1 Series Radiator Here!

Opens live listings in a new tab.

OEM Part Number: 17118586324

As quoted in catalogue listings, confirm via VIN. Aftermarket units: Nissens 60862 / Mahle CR 2642 000P

Accuracy note: Covers the BMW 1 Series (F40 2019 on) as listed in the UK aftermarket catalogues. Radiators are sold by engine, gearbox and air-conditioning fitment, and one model usually has two or three different cores — a thicker core for diesels and automatics, a thinner one for small petrols — with different hose positions, so a radiator for the wrong engine will not connect up. The references below are UK aftermarket listings whose fitment lists name this generation, labelled by brand with the core size in mm; genuine numbers are those quoted against the listing. Check your engine code and whether the car has air conditioning against your VIN, and replace the coolant and bleed the system after fitting.
Radiators (aftermarket)Nissens 60862 (195 x 202 x 26 mm core as listed, aluminium soldered core with plastic tanks, 116i/118i/120i/128ti and M135i xDrive with the B38 1.5 and B48 2.0 petrol engines); Mahle CR 2642 000P; NRF 550235; Hella 8MK 366 300-351; Van Wezel 06012728; Magneti Marelli 350213214500; Prasco BM127R001. Nissens 606789 (680 x 299 x 26 mm, aluminium core, plastic tanks, 118d, 120d and 120d xDrive with the B47 2.0 diesel); Mahle CR 2749 000P
Core sizes & variantsThe F40 uses three different radiators. All petrol models share one unit; the 2.0 B47 diesels (118d, 120d) take a 26 mm-thick core and the 1.5 B37 diesel (116d) a thinner 22 mm core of the same face size.
Genuine (OE) numbers quoted17118586324 and 8586324 (B47 diesel unit); 17118586321 (B37 diesel unit); none quoted for the petrol unit
Fitment notesAll three Nissens units are supplied with seals; inlet and outlet are 32.5 mm on both diesel radiators. The petrol and diesel radiators are not interchangeable, so match the engine code.
Accuracy note: BMW sometimes fits a heavier-duty radiator as standard on 1 Series trims with towing packs or higher-accessory-load options — worth confirming your exact spec rather than assuming the base-model rating applies.

How coolant carries heat away on the 1 Series

There's nothing exciting about this component, yet on the BMW 1 Series, most catastrophic engine failures that aren't simply down to wear trace back to a cooling problem someone ignored too long. Catching it early is cheap; catching it late usually isn't.

Before you buy: radiator size and design vary significantly by engine size, transmission type, and whether your car has air conditioning. Always confirm against your VIN before ordering.

Where engine heat goes

The BMW 1 Series radiator's core job is moving heat out of the engine coolant and into the passing air, holding engine temperature within safe limits. Automatic versions frequently add a second internal circuit for transmission fluid cooling, which is exactly why the correct part number carries extra weight on this component.

Watch: replacing it

🎬 Watch: BMW Radiator removal 1 or 3series or X1. I change out & reinstall my BMW radiator e87 e90 e84 (older gen)

Watch on YouTube ↗

E87 rear-drive 1 Series; no F40 radiator video found, only F40 coolant-tank location clips.

BMW 1 Series Radiator reference plate
Find BMW 1 Series Radiator Here!

Opens live listings in a new tab.

Electric water pump costs

This is useful to know about the water pump specifically: it's often the first cooling system component to fail on related BMW models, typically lasting around 60,000 to 80,000 miles, with a replacement typically costing around £300 to £500 in the UK including parts and labour.

Because every part in the cooling system shares the same pressure, one component failing often reveals the next one waiting to happen shortly after, worth having the whole system properly inspected rather than replacing just the one failed part.

Also, that BMW engines are generally designed to run hotter than many other brands, accelerating wear on plastic cooling components, worth considering preventative replacement around the 80,000 mile mark.

Faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other BMW models.