Car Parts Guide
BRAKE DISCS BMW 2 Series · PARTS GUIDE

BMW 2 Series Brake Discs: Specs, Fitment & Wear Symptoms

On the 2 Series, what's commonly called "warped discs" is genuinely almost always uneven pad deposits, since cast iron is genuinely hard to warp.

Illustration of a brake disc Illustration for editorial purposes
Find BMW 2 Series Brake Discs Here!

Opens live listings in a new tab.

OEM Part Number: 34118848417 (genuine front disc — confirm via VIN) — aftermarket front discs Brembo 09.9750.21 / Bosch 0 986 479 213

Accuracy note: Covers the BMW 2 Series (F22 2014-) as listed in the UK aftermarket catalogues. Front brake discs are sold by diameter and thickness, and most models have two or three disc sizes depending on engine, brake size and trim — a 278 mm disc will not fit a car built with 300 mm brakes, so the caliper carrier and the disc must match. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with diameter x thickness in mm; genuine numbers are shown only where a listing quotes one. Measure the old disc or check the brake size against your VIN before ordering, replace discs in pairs with new pads, and scrap any disc at or below its minimum thickness.
Front brake discs (aftermarket)Brembo 09.9750.21 (284 x 22 mm, vented, 5 holes, coated, high-carbon, min 20.4 mm); Bosch 0 986 479 213 (284 x 22 mm, vented, 5 holes, coated, high-carbon, min 20.4 mm); ATE 24.0122-0239.1 (284 x 22 mm, vented, 5 holes, coated, high-carbon, min 20.4 mm); Brembo 09.B337.21 (312 x 24 mm, vented, 5 holes, coated, high-carbon, min 22.4 mm); Bosch 0 986 479 381 (312 x 23.9 mm, vented, 5 holes, coated, high-carbon, min 22.4 mm); ATE 24.0124-0203.1 (312 x 24 mm, vented, 5 holes, coated, high-carbon, min 22.4 mm); TRW DF4807S (312 x 24 mm, vented, 5 holes, black painted, high-carbon); Bosch 0 986 479 A06 (330 x 24 mm, vented, 5 holes, coated, high-carbon, min 22.4 mm)
Disc sizes & variantsFour front sizes, 284 mm, 312 mm, 330 mm and 340 mm. The 284 x 22 mm disc is the base fitment on the 218i and 218d, the 312 x 24 mm disc is the common fitment on the 220i, 220d and 225d, the 330 x 24 mm disc goes on the M Sport brake cars and the 235i/240i, and the 340 x 30 mm disc (febi 105724, drilled) is the M2 size.
Genuine (OE) numbers quoted34118848417 (genuine front disc number for this model — confirm via VIN, as several disc sizes exist)
Fitment notesMinimum thickness is 20.4 mm on the 284 mm disc, 22.4 mm on the 312 mm and 330 mm discs and 28.4 mm on the 340 mm disc. Brembo 09.B337.2X is the drilled 312 mm option and ATE 24.0324-0203.1 is the PowerDisc version; febi 30541 and Ridex 82B0273 are the coated budget 312 mm discs.

BMW 2 Series Brake Discs: The Part That Pads Depend On

On the BMW 2 Series, discs and pads don't wear independently — neglect one and the other degrades faster too, which is exactly why what starts as a routine pad change frequently turns into a disc replacement as well.

Before you buy: disc size and design vary by trim, engine size and whether your car has the standard or "sport" brake package. Always confirm against your VIN before ordering.

BMW 2 Series Brake Discs: Watch: Replacing It

🎬 Watch: bmw f22 brakes replacement (powerstop z26 on M235i)

Watch on YouTube ↗

F22 M235i pads+rotors; alt prbDPoZOJeg (M2 discs onto F22 235i) is an upgrade not a like-for-like.

BMW 2 Series Brake Discs reference plate

BMW 2 Series Brake Discs: What They Do

Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the 2 Series typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.

Find BMW 2 Series Brake Discs Here!

Opens live listings in a new tab.

A Genuinely Important, Honest Clarification Worth Knowing — BMW 2 Series Brake Discs

If a vibration under braking has been diagnosed as warped discs, this is genuinely worth knowing: what's commonly described as "warped discs" is, in reality, almost always caused by uneven deposits of pad material on the disc surface, since cast iron itself is genuinely difficult to warp under normal driving conditions.

A genuinely alarming, honest account worth knowing: documented cases describe fast-fit chains replacing "warping" discs under warranty multiple times within less than a year, with owners suspecting the cheapest available parts were being used.

It's also genuinely worth knowing a useful fix worth trying: thoroughly cleaning the mating surfaces between the wheel hub and the disc, or better still fitting new hubs entirely, has been documented resolving this kind of persistent vibration.

BMW 2 Series Brake Discs: Wear Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.

More BMW Brake Discs

The same part, covered across other BMW models.