BMW 2 Series Rear Bumper: Fitment, Sensors & Common Damage
On the 2 Series, with an uncoded towbar fitted on related models, the parking sensors can detect a trailer as a hazard, causing sudden hard braking while reversing.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Diederichs 1235455 / Blic 5506-00-00699510MP
| Rear bumper covers (aftermarket) | Diederichs 1235455 (Rear, for vehicles with park assist, Smooth); Blic 5506-00-00699510MP (Rear, from 10.2013, to 06.2016); Blic 5506-00-0069951KP (Rear, with holes for parking sensors, from 10.2013, to 06.2016); Blic 5506-00-0069950KP (Rear, from 10.2013, to 06.2016) |
|---|---|
| Lower sections, corners & trims | Diederichs 1235367 (Rear, Section: Lower Section, with holes for exhaust pipe); Diederichs 1235366 (Rear, Section: Lower Section, with holes for exhaust pipe) |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
More than plastic: what a repair at the back of the 2 Series involves
The BMW 2 Series's rear bumper routinely integrates parking sensors, a reversing camera housing and sometimes exhaust trim finishers, which means replacing it after even minor kerb damage often involves more than a straightforward swap.
Sensors, lights and impact protection at the back of the 2 Series
Beyond absorbing minor impacts, the rear bumper on higher trims of the 2 Series often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| Standard trims | Alpine White (no-cost), Black Sapphire, Skyscraper Grey |
|---|---|
| M2 | M Sao Paulo Yellow and M Zandvoort Blue are genuine M2-exclusive shades; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
Constant sensor beeps after a towbar is fitted
If a towbar has just been fitted without any accompanying coding work, the rear parking sensors and reversing camera can detect an attached trailer as a hazard on related BMW models. Documented cases describe the car applying the brakes hard and stopping suddenly after reversing only a short distance with a trailer attached, caused by the automatic emergency braking function reacting to what it perceives as an obstacle. This specific braking function can typically be manually disabled through the iDrive settings menu.
Also, checking your car's specific option codes against its VIN can confirm whether a genuine reversing camera was actually fitted from the factory.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other BMW models.