Car Parts Guide
REAR BUMPER BMW X5 · PARTS GUIDE

BMW X5 Rear Bumper: Fitment, Sensors & Common Damage

On the X5, with an uncoded towbar fitted on related models, the parking sensors can detect a trailer as a hazard, causing sudden hard braking while reversing.

BMW X5 (F15 2013-2018) rear bumper, aftermarket Diederichs 1293363 Illustration for editorial purposes
Find BMW X5 Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Diederichs 1293363 / Blic 5506-00-0096955P

Accuracy note: Covers the BMW X5 (F15 2013-2018) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Diederichs 1293363 (Rear, Colour: black/silver); Blic 5506-00-0096955P (Rear, from 07.2013, to 04.2017); Blic 5506-00-0096954P (Rear, Colour: black, from 07.2013); Blic 5506-00-0096955BP (Rear, from 07.2013, to 06.2018); Blic 5506-00-0096958P (Rear, Colour: black, from 07.2013, to 06.2018); Blic 5506-00-0096956P (Rear, from 07.2013, to 04.2017)
Lower sections, corners & trimsJumasa 25450556 (Rear, Lower, without holes for parking sensors); Jumasa 25470556 (Rear, Upper, primed, with holes for parking sensors); Jumasa 25460556 (Rear, Upper, primed)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Why repairs to the back of the X5 add up

The BMW X5's rear bumper routinely integrates parking sensors, a reversing camera housing and sometimes exhaust trim finishers, which means replacing it after even minor kerb damage often involves more than a straightforward swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

The tail-end structure of the X5, explained

Beyond absorbing minor impacts, the rear bumper on higher trims of the X5 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Watch: replacing it

🎬 Watch: how to remove 2011 BMW X5 rear bumper & reflector (older gen)

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

BMW X5 Rear Bumper reference plate
Generations, Derivatives and Colour
Core trims (sDrive40i/xDrive40i/xDrive50e)Alpine White is the only no-cost, non-metallic colour — Isle of Man Green, Marina Bay Blue and Toronto Red are not offered on these trims at any price
M60iMarina Bay Blue becomes a standard no-cost option on this trim, unlike on core trims
M CompetitionDravit Grey becomes standard, plus exclusive access to Gentian Blue and Brands Hatch Grey; the rear bumper is also styled differently on this trim
Find BMW X5 Rear Bumper Here!

Opens live listings in a new tab.

Sensors that don't know a trailer is attached: the X5 risk

If a towbar has just been fitted without any accompanying coding work, the rear parking sensors and reversing camera can detect an attached trailer as a hazard on related BMW models. Documented cases describe the car applying the brakes hard and stopping suddenly after reversing only a short distance with a trailer attached, caused by the automatic emergency braking function reacting to what it perceives as an obstacle. This specific braking function can typically be manually disabled through the iDrive settings menu.

Not all aftermarket towbar electrics kits behave the same way — one case saw the parking sensors correctly switch off, but the rear reversing camera remained active regardless.

Also, checking your car's specific option codes against its VIN can confirm whether a genuine reversing camera was actually fitted from the factory.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other BMW models.