Dacia Logan MCV Rear Bumper: Fitment, Sensors & Common Damage

On the Logan MCV, a genuinely important safety warning: a real case saw a UK towbar loom mismatch cause the fog light to activate instead of reverse.

Illustration for editorial purposes

OEM Part Numbers

Accuracy note: we weren't able to verify a confident Dacia Logan MCV rear bumper part number at the time of writing. Please confirm the correct part via a Dacia dealer or parts specialist using your VIN.

A Genuinely Important Safety Warning Worth Knowing Before Towbar Fitting — Dacia Logan MCV Rear Bumper

This is worth taking seriously if you're having a towbar wiring loom fitted: one documented case on a related model saw a fitter connect a 7-pin loom that had the reverse light and fog light functions genuinely swapped — selecting reverse caused the trailer's fog light to illuminate instead of the reverse light. The fitter suspected the loom itself was designed for a left-hand-drive market car despite being sold for a UK right-hand-drive vehicle. This is a genuine safety concern — a fog light activating unexpectedly when reversing could confuse other road users. It's worth specifically confirming any loom is genuinely UK-specification and having the fitter verify reverse and fog functions operate correctly before considering the job complete.

A genuine cost figure worth knowing if your car has factory reversing camera hardware: even once the physical camera has been fitted, it commonly requires activation through dealer-level diagnostic software before it will actually work — one documented case saw this activation step alone cost £108 for an hour's labour, separate from the camera and its installation.

It's also worth knowing that a fixed, bolt-on towball can genuinely trigger false parking sensor warnings on some cars, even without a trailer attached.

More Than Just a Plastic Panel

Modern rear bumpers routinely integrate parking sensors, reversing camera housings and sometimes exhaust trim finishers, which means replacing one after even minor kerb damage often involves more than a straightforward swap.

Dacia Logan MCV Rear Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the Logan MCV often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations & Colour

Standard/lower grades	Glacier White, Cinder Red, Pearl Black — unpainted black door handles and mirrors were standard on lower grades, not colour-coded like upper trims
Upper grades (2016 facelift onward)	Body-coloured door handles and mirrors became standard; blackened B/C-pillars were available to create a "floating roof" look, genuinely different from lower-grade styling

Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Dacia Rear Bumper

The same part, covered across other Dacia models.

Dacia Logan MCV Rear Bumper: Fitment, Sensors & Common Damage

OEM Part Numbers

A Genuinely Important Safety Warning Worth Knowing Before Towbar Fitting — Dacia Logan MCV Rear Bumper

Shop for This Part on eBay