Car Parts Guide
REAR BUMPER Fiat 500L · PARTS GUIDE

Fiat 500L Rear Bumper: Fitment, Sensors & Common Damage

On the 500L, directly splicing towbar wiring into the car's own circuit can trigger the CAN-bus system to disable it entirely.

Fiat 500L (2012 ON) rear bumper, primed cover, aftermarket Prasco FT0401051 Illustration for editorial purposes
Find Fiat 500L Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco FT0401051 / Van Wezel 1609544

Accuracy note: Covers the Fiat 500L (2012-) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Prasco FT0401051 (Rear, primed); Prasco FT0401061 (Rear, primed, with holes for parking sensors); Van Wezel 1609544 (Rear, for vehicles without parking sensors, primed, without holes for parking sensors); Van Wezel 1609545 (Rear, primed, with holes for parking sensors); Diederichs 3405656 (Rear, for vehicles with parking sensors); Diederichs 3405655 (Rear, for vehicles without parking sensors, for vehicles with parking sensors, primed)
Lower sections, corners & trimsDiederichs 3405658 (Right Rear, Rough); Diederichs 3405659 (Left Rear, Rough)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Why the 500L needs a proper towbar module

If you're fitting towbar electrics yourself, this is important: the proper OEM approach uses individual signal wires for each function to avoid the car's CAN-bus system detecting an electrical overload. Directly splicing a trailer light circuit into the car's own wiring risks the car's own computer disabling that circuit entirely, rather than the trailer simply failing to work.

One case on a related model found that Fiat had stopped fitting the specific socket that a genuine towbar wiring kit expects to connect into, forcing the fitter to cut off the original plug and wire directly into the main fuse box instead.

Bear in mind that reversing sensors are generally unaffected by towbar fitting, but the towball cover, if positioned even slightly askew, can trigger a false sensor warning.

What a parking scrape at the back can damage on the 500L

What looks like a simple panel swap on the Fiat 500L often isn't, since rear bumpers on current cars typically integrate parking sensors, a reversing camera mount, and occasionally exhaust trim — all of which need transferring or replacing alongside the bumper itself.

Watch: replacing it

🎬 Watch: Fiat 500 How To Remove Rear Bumper Removal Replacement Removing

Watch on YouTube ↗

This video shows a closely related car on the same platform, so fixings can differ slightly on yours.

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Fiat 500L Rear Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Sensors, lights and impact protection

Beyond absorbing minor impacts, the rear bumper on higher trims of the 500L often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations and Colour
Standard trimsPasodoble Red is the no-cost default colour on the 500L — unlike the standard 500, where Bossa Nova White is free; Bossa Nova White and other shades are technically listed as paid options
Dolcevita special editionBossa Nova White and Lunar Grey are the two colours paired with this trim's chrome details and glass sunroof; a two-tone livery is also optionally available
Find Fiat 500L Rear Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Fiat models.