Fiat Tipo Radiator: Specs, Fitment & Common Faults
On the Tipo, a cracking plastic thermostat housing spigot is the single most common cause of coolant leaks.
Opens live listings in a new tab.
OEM Part Number: 52015588
As quoted in catalogue listings, confirm via VIN. Aftermarket units: Nissens 606810 / Mahle CR 2884 000S
| Radiators (aftermarket) | Ava Quality Cooling FT2472 (620 x 388 x 16 mm, aluminium soldered fins, plastic tanks; fits 1.3 D Multijet 95 hp and 1.4 120 hp); Nissens 606810 (620 x 416 x 18 mm, aluminium mechanically jointed fins, plastic tanks, supplied with seals; same 1.3 D and 1.4 engines); cross-refs Hella 8MK 366 304-061, Mahle CR 2884 000S, JDEUS M-0111590, Kale 348440 / 363915, Maxgear AC230251, Electro Auto 31R25152. |
|---|---|
| Core sizes & variants | The 1.3 Multijet diesel and 1.4 petrol share this single-thickness 16-18 mm core |
| Genuine (OE) numbers quoted | 52015588; 52052220 (Fiat) |
| Fitment notes | Inlet 35 mm, outlet 38.5 mm; the Ava box includes O-rings and clips and the Nissens comes with gaskets, so no separate seal kit is needed. |
Check this first when the Tipo loses coolant
Before chasing coolant leaks in the wrong place, across numerous independently documented cases on related models, the single most common cause is a plastic spigot on the thermostat housing cracking with age. A pink or white crusty residue building up around the housing is the first visible warning sign, appearing well before an active drip.
This engine family is very prone to head gasket failure if run with low coolant, and this can happen before the overheat warning light illuminates. A bubbling sound heard from inside the car, particularly around the glovebox, has been reported as an early sign of a leaking thermostat housing.
Overheating on the Tipo: why it gets expensive fast
There's nothing exciting about this component, yet on the Fiat Tipo, most catastrophic engine failures that aren't simply down to wear trace back to a cooling problem someone ignored too long. Catching it early is cheap; catching it late usually isn't.
Watch: replacing itClosest video found; the radiator comes out the same way once the front panel and fan are off
How the Tipo's fan and core work together
The Fiat Tipo radiator's core job is moving heat out of the engine coolant and into the passing air, holding engine temperature within safe limits. Automatic versions frequently add a second internal circuit for transmission fluid cooling, which is exactly why the correct part number carries extra weight on this component.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Fiat models.