Ford Mondeo Brake Pads: Specs, Fitment & Wear Symptoms
A well-documented Ford assembly fault causes squeaking on otherwise healthy pads — genuinely worth checking before assuming a replacement is needed.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — front pads (aftermarket) Brembo P 24 173 / Bosch 0 986 494 837
| Front brake pads (aftermarket) | Brembo P 24 173 (155/156 x 67/76 x 20 mm, acoustic wear warning, ATE/Teves/Continental); Brembo P 24 076X (155/156 x 67/72 x 20 mm, no wear contact, ATE/Teves/Continental); Brembo P 24 211 (155/156 x 67/72 x 19/20 mm, no wear contact, ATE/Teves/Continental); Bosch 0 986 494 837 (154.9/155.7 x 66.5/75.8 x 19.3/20.1 mm, wear sensor not stated); TRW GDB2092 (155.2/155.8 x 66.7/75.9 x 19/20 mm, acoustic wear warning, ATE restriction); ATE 13.0460-7313.2 (155.1/155.7 x 66.7/76 x 19.4/20.3 mm, acoustic wear warning, ATE/Teves/Continental); Ridex 402B0052 (155.1/156.3 x 66.6/72 x 20.3 mm, not prepared for wear warning, ATE/Teves/Continental) |
|---|---|
| Pad sizes & variants | Two height variants are listed: the 67/76 mm high pad (Brembo P 24 173, Bosch 0 986 494 837, TRW GDB2092, ATE 13.0460-7313.2) and the 67/72 mm high pad (Brembo P 24 076X, P 24 211, Ridex 402B0052), both about 155 mm wide and 19-20 mm thick. |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine pads against your VIN |
| Fitment notes | All the front sets are for ATE/Teves/Continental brakes; the acoustic wear warning is included on the Brembo P 24 173, TRW and ATE sets but not on the Brembo P 24 076X or P 24 211. |
A Genuine Ford Factory Fault Worth Ruling Out Before Replacing Pads — Ford Mondeo Brake Pads
A genuine, documented Ford factory issue worth knowing about: brake pads fitted with insufficient grease on the contact points during assembly can squeak persistently even when the pads themselves are nowhere near worn out. Ford's own customer service has confirmed this specific cause on affected cars, and the fix is straightforward — removing the pads, cleaning the caliper contact points, and applying the correct silicone-based brake grease (never ordinary grease, which can affect braking performance) resolves it in the large majority of cases without needing new pads at all.
A Genuinely Important Detail If You Have an ST or Performance-Trim Model — Ford Mondeo Brake Pads
Ford's OEM "sporty" performance brake pads — as fitted to ST and similar performance trims where offered — genuinely don't have the audible squeal wear indicator that standard pads use to warn you they need replacing. This means relying on hearing a warning squeal simply won't work on these cars, and owners need to check pad thickness visually through the wheel spokes, or watch the brake fluid reservoir level (which drops slightly as pads wear), rather than waiting for a noise that isn't coming.
Ford Mondeo Brake Pads: What They Do
Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the Mondeo with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can genuinely extend pad life compared with a purely petrol or diesel equivalent.
Ford Mondeo Brake Pads: Watch: Replacing It
Mk5 front discs and pads.
Common Sizes
| Mk3 (2000-2007), front pad | Confirm exact fitment via VIN — pad size on this model genuinely varies by engine and trim, not just by generation. |
|---|---|
| Mk5 (2014 onwards), 2.0 diesel, front pads | Genuinely a different, larger pad to match the 300mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle. |
| Mk5, rear pads | Sized to match the 302mm disc/caliper on this tier. Pad size genuinely scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone. |
Opens live listings in a new tab.
Ford Mondeo Brake Pads: Wear Symptoms, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.
More Ford Brake Pads
The same part, covered across other Ford models.