Hyundai i10 Headlights: Specs, Fitment & Common Faults
Bulb type, unit part numbers, and the faults that actually cause that flickering or dim light you've noticed.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: LH TYC 20-17386-05-2 / RH TYC 20-17385-05-2
| Passenger side (LH / nearside) headlight — aftermarket | Van Wezel 8249961 (halogen H4, electric levelling motor, pre-facelift); Van Wezel 8249965 (halogen H7/H4, dynamic bending light, pre-facelift); TYC 20-17386-05-2 (halogen H7/H4, electric levelling motor, cornering light); TYC 20-14606-15-2 (halogen H4, electric levelling); Diederichs 6853083 (halogen H7/H4, electric levelling motor); Abakus 221-1176L-LDEM2 (halogen H4, electric levelling) |
|---|---|
| Driver's side (RH / offside) headlight — aftermarket | Van Wezel 8249962 (halogen H4, electric levelling motor, pre-facelift); Van Wezel 8249966 (halogen H7/H4, dynamic bending light, pre-facelift); TYC 20-17385-05-2 (halogen H7/H4, electric levelling motor, cornering light); TYC 20-14605-05-2 (halogen H4, electric levelling motor); Diederichs 6853082 (halogen H7/H4, electric levelling motor); Abakus 221-1176R-LDEM2 (halogen H4, electric levelling) |
| Bulb types | H4 (main and dipped), H7 on cornering-light units, indicator PY21W, sidelight W5W |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine units against your VIN |
| Fitment notes | All halogen; no DRL stated and no xenon or LED listed. H7/H4 units are the cornering-light versions, and some units are pre-facelift only. |
LED bulbs in halogen housings: an MOT fail on the i10
If your i10 has factory-fitted halogen headlamp housings, converting them to fit LED bulbs is treated as a definite MOT failure under the current inspection manual — this isn't a grey area or a minor advisory, since a housing designed for halogen doesn't distribute an LED bulb's light output correctly, which can dazzle oncoming drivers. If you want a genuine LED upgrade, the correct route is a complete headlight unit designed for LED from the factory, not a bulb swap into an existing halogen housing.
First-gen i10; 2014+ gen not clearly identified in results.
Beam pattern, cut-off and the i10's front units
The Hyundai i10's headlight unit houses the main and dipped beam bulbs (or LED/matrix modules on higher trims), positioned and angled to illuminate the road ahead without excessively dazzling oncoming traffic. Many modern units also integrate the daytime running light and front indicator into the same housing, which affects both the part number and the complexity of any repair.
The i10's lamp variants by generation
| Standard trims | Halogen as standard |
|---|---|
| Higher trims/N Line | LED headlights become available further up the range, a different assembly and connector from the halogen units on lower trims |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Headlights Guide for the four bulb technologies and how they differ, UK law on aim and modifications, common faults to check for, how difficult this job is to DIY, and confirming fitment against your VIN.
The same part on other modelsThe same part, covered across other Hyundai models.