Hyundai Kona Headlights: Specs, Fitment & Common Faults
Bulb type, unit part numbers, and the faults that actually cause that flickering or dim light you've noticed.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: LH TYC 20-17836-06-2 / RH TYC 20-17835-06-2
| Passenger side (LH / nearside) headlight — aftermarket | Van Wezel 8279963 (LED with H7, motor levelling); TYC 20-17836-06-2 (LED with H7, DRL, electric levelling); Alkar 2741047 (LED with H7, electric levelling motor); Diederichs 6815081 (LED with H7, motor levelling, not for facelift); Johns 39 74 09 (halogen H7/H7, motor levelling); TYC 20-16912-05-2 (halogen H7/H7, electric levelling) |
|---|---|
| Driver's side (RH / offside) headlight — aftermarket | TYC 20-17835-06-2 (LED with H7, DRL, electric levelling); Alkar 2742047 (LED with H7, electric levelling motor); Diederichs 6815080 (LED with H7, motor levelling, not for facelift); Johns 39 74 10 (halogen H7/H7, motor levelling); TYC 20-16911-05-2 (halogen H7/H7, electric levelling); Van Wezel 8279962 (halogen H7/H7, motor levelling) |
| Bulb types | dipped H7 (halogen H7/H7), HB3 on facelift halogen units, LED modules, indicator not specified |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine units against your VIN |
| Fitment notes | Halogen H7 on lower trims and LED units on higher trims; the facelift halogen units use HB3. No xenon listed. |
Why a plug-in LED upgrade is illegal on the Kona
If your Kona has factory-fitted halogen headlamp housings, converting them to fit LED bulbs is treated as a definite MOT failure under the current inspection manual — this isn't a grey area or a minor advisory, since a housing designed for halogen doesn't distribute an LED bulb's light output correctly, which can dazzle oncoming drivers. If you want a genuine LED upgrade, the correct route is a complete headlight unit designed for LED from the factory, not a bulb swap into an existing halogen housing.
Bulb access for first-gen Kona.
What each front lamp unit does
Inside the Hyundai Kona's headlight unit sit the main and dipped beam bulbs, or LED/matrix modules on higher trims, precisely angled to light the road ahead without dazzling oncoming drivers. Many current units also fold the daytime running light and front indicator into the same housing, which complicates both the part number and any repair.
Which front lamp fits which Kona
| Gen 1 (2018–2023), SE/SEL trims | Halogen (H7) type in a projector housing |
|---|---|
| Gen 1, Limited/Ultimate trims | Full LED — non-serviceable LEDs for both low and high beams; not interchangeable with the halogen units without extensive wiring and programming modifications |
| Gen 2 (2024–present) | Different generation entirely with a "Seamless Horizon Lamp" thin light bar design — parts do not interchange with Gen 1 at all, halogen vs LED distinction continues within this generation too |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Headlights Guide for the four bulb technologies and how they differ, UK law on aim and modifications, common faults to check for, how difficult this job is to DIY, and confirming fitment against your VIN.
The same part on other modelsThe same part, covered across other Hyundai models.